Replacement Of Cable; Obtaining Backup Data - Panasonic LP-RF Series Setup & Maintenance Manual

7-2-12 Replacement of cable

If the cable connecting the head and controller is broken because of the usage conditions and installation environment, it
needs to be replaced.
„ Models of replacement parts
For details of purchasing cables, contact our sales office.
Part name Model
Unit power cable LP-ACP20-5
Signal cable LP-ACS10-5
„ Steps for replacement
See "2-5-1 Connection of head and controller" (P.47), and connect cables.
• To ensure the ingress protection (IP64) of the head, install the attached connector cover to the cable. Refer to "Installing
connector cover to cable" (P.48).

7-3 Obtaining Backup Data

Obtain and keep a backup of data registered in the laser marker periodically using the Laser Marker NAVI smart in case of
replacing laser markers for repairing and maintaining purposes.
„ Steps for obtaining backup data (daily maintenance)
1.
Establish an online connection between your PC and the laser marking system.
2.
Go to the "Data management" screen and select "Backup" in the ribbon.
3.
Specify the name and storage destination for a backup file.
Select "Save" to save the backup file.
ME-LPRF-SM-11
183