Kohler KD62V12 Operation And Maintenance Manual page 85

Component
Engine oil filters
SL101
standard
Engine oil change
with engine oil
"Category 2"
SL121
Engine oil change
with engine oil
"Category 3"
Engine oil filters
SL101
standard
Centrifugal oil
SL102
filter - paper filter
Engine oil change
with engine oil
"Category 2"
SL121
Engine oil change
with engine oil
"Category 3"
KD62V12 33521030301_8_1 EN_US 2022-09
Service
Schedule
Type
Without centrifugal oil filter
250 2Y X
250 2Y X
500 2Y X
With centrifugal oil filter
500 2Y X
500 2Y X
250 2Y X
500 2Y X
© 2022 by Kohler Co. All rights reserved.
Inspection and maintenance schedules
Task description
Replace filters. Clean the seal area before removal
the old filter to prevent oil contamination.
information see: 5.9.4 Changing oil filters — SL101,
page 113.)
Oil change maximum interval. Note: Replace engine
oil at least every 2 years. Final engine oil interval
depends on exchange interval factor according to
engine oil category and fuel sulfur rate. 0<fuel
sulfur rate<0.5%: the factor is 1 (no change on the
engine oil change interval). 0.5<fuel Sulfur rate<1%:
the factor is 1/2 (reduce by 2 times the engine oil
change interval and use only engine oil category 2
or 3). 1<fuel sulfur rate <1.5%: requires additional
approval. No oil Category 1 in case of K175.
more information see: 5.9.6 Changing engine oil —
SL101, SL121, page 118.)
Replace filters. Clean the seal area before removal
the old filter to prevent oil contamination.
information see: 5.9.4 Changing oil filters — SL101,
page 113.)
Replace the paper (sleeve) for sludge at each oil
change. Measure and record thickness of the
sludge accumulated on paper if above limits.
Reduce engine oil interval if the sludge accumu‐
lated is above limits. (For more information see:
5.9.5 Replacing centrifuge paper filter — SL102,
page 114.)
Oil change maximum interval. Note: Replace engine
oil at least every 2 years. Final engine oil interval
depends on exchange interval factor according to
engine oil category and fuel sulfur rate. 0<fuel
sulfur rate<0.5%: the factor is 1 (no change on the
engine oil change interval). 0.5<fuel Sulfur rate<1%:
the factor is 1/2 (reduce by 2 times the engine oil
change interval and use only engine oil category 2
or 3). 1<fuel sulfur rate <1.5%: requires additional
approval. No oil Category 1 in case of K175.
more information see: 5.9.6 Changing engine oil —
SL101, SL121, page 118.)
Maintenance
(For more
(For
(For more
(For
85