Siemens SIMATIC Ident RF360M Operating Instructions Manual page 74

"SIMATIC Mobile Reader" app
5.4 Functions of the UHF app variant (RF660M)
Settings
Switch off
when...
Factory
settings
About
You can find information on the various current versions in the "About" tab.
Figure 5-24
74
Description
Slider to enable/disable the head module
If the function has been enabled, the head module is switched off automatically
as soon as the "SIMATIC Mobile Reader" app goes to the background. This
function is an energy-saving function to maximize the battery lifetime.
Button for resetting the mobile reader to factory settings
With this function, the "SIMATIC Mobile Reader" app is reset to the factory
settings. The data saved on the device (e.g. log files) is not deleted in this
process. To delete this data, you need to reset the operating system or delete the
data manually.
You can reset the operating system in the system settings under "Settings >
System > Advanced > Reset options > Delete all data (factory settings)".
"Settings > About" menu
Mobile reader SIMATIC RF360M/RF660M
Operating Instructions, 08/2022, C79000-G8976-C660-02