Table of Contents
Advertisement
"SIMATIC Mobile Reader" app
5.4 Functions of the UHF app variant (RF660M)
Table 5- 12
Menus
Scan
Tag Editor
Locate
Settings
Click the button of the desired menu to open it.
With the icon
to the relevant menus or back to the home screen.
Note
Terms within the app and documentation
Note that the term "Tag" is generally used in the "SIMATIC Mobile Reader" app, whereas the
term "Transponder" is used in this manual. These terms are synonyms and have the same
meaning.
54
The menus of the "SIMATIC Mobile Reader" app
Functions
•
Starting/stopping scanning
•
Overview of the identified transponders
•
Display of the acquisition speed
•
Starting/stopping scanning
•
Selecting the transponder to be edited
•
Reading and writing transponder data
•
Locking and unlocking memory areas
•
'Killing' transponders
•
Starting/stopping scanning
•
Overview of the identified transponders
•
Selecting the transponder to be located
•
Transponder localization based on the received signal strength
•
Specifying UHF settings
•
Exporting and resetting the logbook
•
Performing firmware update of the reader head module (Mcon)
•
Enabling/disabling acoustic signals/sounds
•
Resetting the app to factory settings
•
Reading out version information
at the top left, you open a menu overview via which you can jump directly
Mobile reader SIMATIC RF360M/RF660M
Operating Instructions, 08/2022, C79000-G8976-C660-02
Advertisement
Table of Contents
