Optional Accessories; Ac Adapter; Power Supply Cable; Dustproof Filter - SMC Networks HEF Series Manual

HEF

Optional Accessories

AC Adapter

Part no. Applicable model
INR-244-831
HEC-S1896
HEF002-A6
Label
Power supply connector
L
IEC60320 C14 (or equivalent)
Pin no. Signal contents
N 100-240 VAC
L 100-240 VAC
E PE
N

Power Supply Cable

For Single-phase 100/115 VAC type
∗ Not applicable for the 200 V type.
Part no. Applicable model
HRS-CA001
HEC-S1896
For Single-phase 200 VAC type
∗ Can also be used with the 100 V power type if a connector
is provided by the customer
Part no. Applicable model
HRS-CA002 HEC-S1896

Dustproof Filter

Part no. Applicable model
HEF-FL001
HEF002-A6
HEF-FL002
Parts List
No. Description
q Dustproof filter set HEF-FL001
w Dustproof filter HEF-FL002
11
Series Air-cooled
(254)
DC output connector
JST: J42FSC-02V-KX
Pin no. Signal contents
1 24 VDC +
2 24 VDC −
E
AC adapter side
AC adapter side
Part no. Note
Front panel, Filter: 1 piece each
Filter: 1 piece
(1200)
DC output connector
Specifications
Power supply input 100-240 VAC, Single-phase, 50/60 Hz, Max. 3.9 A
DC output
Operating
environment Humidity: 20 to 80 %RH, (no condensation)
2 1
DC output connection Thermo-con (HEF002-A6, INR-244-831)
∗ Not for use with other products
The power supply cable can only be used for the applicable
models shown below. Do not use it for other products.
Approx. 3 m
Approx. 3 m
Power supply connector
24 VDC, Max. 12.5 A
Ambient temperature: 0 to 40 °C,
Costumer side
Approx. 100 mm
Costumer side
q
w