Emerson Rosemount Volume 1 Quick Start Manual page 22

Quick Start Guide
Standards CAN/CSA C22.2 No. 0:2010, CAN/CSA No. 25-1966 (R2000),
Markings
†
Spring loaded indicator has reduced ingress and dust ratings. Spring loaded
sensors must be installed in a thermowell to maintain dust and ingress
ratings. Un-painted aluminum enclosures are Type 4 rated.
*Assembly is not Canada Explosionproof (E6) rated to Group B if the R, T, P
or L (Aluminum Connection Head with Six Terminals) connection head is
used
10.6 Europe
E1 ATEX Flameproof
Certificate FM12ATEX0065X
Standards EN 60079-0: 2012+A11:2013, EN 60079-1: 2014, EN
Markings
Special Conditions for Safe Use(X):
1. See certificate for ambient temperature range.
2. The non-metallic label may store an electrostatic charge and become
a source of ignition in Group III environments.
3. Guard the LCD display cover against impact energies greater than 4
joules.
4. Flameproof joints are not intended for repair.
5. A suitable certified Ex d or Ex tb enclosure is required to be connected
to temperature probes with Enclosure option "N".
6. Care shall be taken by the end user to ensure that the external
surface temperature on the equipment and the neck of DIN Style
Sensor probe does not exceed 130 °C.
7. Non-Standard Paint options may cause risk from electrostatic
discharge. Avoid installations that cause electrostatic build-up on
painted surfaces, and only clean the painted surfaces with a damp
22
CAN/CSA C22.2 No. 30-M1986 (R2012), CAN/CSA C22.2 No.
94-M1991 (R2011)
XP CL I, DIV 1, GP B*, C, D; DIP CL II, DIV 1, GP E, F, G; CL III; T6
(-50 °C ≤ T ≤ +80 °C), T5 (-50 °C ≤ T
a
required; installed per Rosemount drawing 00068-0033; Type
†
4X and IP 66/67; V
60529:1991 +A1:2000 + A2:2013
II 2 G Ex db IIC T6...T1 Gb, T6(-50 °C ≤ T
T1(-50 °C ≤ T ≤ +60 °C)
a
See Process temperature limits
≤ +95 °C); Seal not
a
35 VDC, 750 mW
max
for process temperatures.
March 2021
max
≤ +40 °C), T5...
a
Emerson.com/Rosemount