Download
Share
Print this page
Roland FS-1-WL Connection Manual
  1. Manuals
  2. Brands
  3. Roland Manuals
  4. Music Pedal
  5. FS-1-WL
  6. Connection manual
Roland FS-1-WL Connection Manual

Roland FS-1-WL Connection Manual

Connecting to waza tube amp expander core
Hide thumbs Also See for FS-1-WL:
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
FS-1-WL Connection Guide
(Connecting to WAZA Tube Amp Expander Core)
© 2025 Roland Corporation
This guide explains how you can use MIDI over
Bluetooth
the FS-1-WL to the WAZA Tube Amp Expander Core.
"Pairing" means registering a MIDI device with the
FS-1-WL (making the two devices recognize each
other).
After pairing, you can transmit and receive MIDI data
between the FS-1-WL and your compatible device.
What is "MIDI over Bluetooth Low Energy"?
"MIDI over Bluetooth Low Energy" is the technology
used to transmit and receive MIDI messages wirelessly
by using the Bluetooth LE standard.
Low Energy to wirelessly pair (connect)
®
01

Advertisement

loading
Need help?

Need help?

Do you have a question about the FS-1-WL and is the answer not in the manual?

Questions and answers

Related Manuals for Roland FS-1-WL

Summary of Contents for Roland FS-1-WL

  • Page 1 This guide explains how you can use MIDI over Bluetooth Low Energy to wirelessly pair (connect) ® the FS-1-WL to the WAZA Tube Amp Expander Core. “Pairing” means registering a MIDI device with the FS-1-WL (making the two devices recognize each other).
  • Page 2 The Bluetooth indicator on the FS-1-WL stops blinking and remains lit white when pairing is finished, and the WAZA Tube Amp Expander Core and FS-1-WL are now connected. When the devices are correctly connected, their respective statuses are as follows.
  • Page 3 WAZA Tube Amp Expander Core, if you’ve turned off the unit with the Bluetooth indi- cator blinking white (disconnected), or if you performed a factory reset of the FS-1-WL, the device does not pair automatically. In this case, you must start from step 1 to con- figure the settings.
  • Page 4 Connecting the WAZA Tube Amp Expander Core, FS-1-WL and the WAZA Tube Amp Expander Core Editor (iOS/Android) at the same time When connecting these units and the app at the same time, you need to perform the following two steps.
  • Page 5 FS-1-WL blinks white, and pairing begins. The Bluetooth indicator on the FS-1-WL stops blinking and remains lit white when pairing is finished, and the WAZA Tube Amp Expander Core and FS-1-WL are now connected. Press the [Bluetooth] (Smartphone/PC) button on the FS-1-WL.
  • Page 6 WAZA Tube Amp Expander Core, if you’ve turned off the unit with the Bluetooth indi- cator blinking white (disconnected), or if you performed a factory reset of the FS-1-WL, the device does not pair automatically. In this case, you must start from step 1 to con- figure the settings.
  • Page 7 In the WAZA Tube Amp Expander Core Editor’s MIDI SETTING, assign the CC number corresponding to the FS-1-WL setting value of the parameter you want to control. The default CC numbers set for the FS-1-WL are as shown below. Parameter MIDI CC#...