AWS SEAL-N-WEIGH User Manual page 6

SEAL-N-WEIGH -
the batteries are installed, you can also use the digital
scale even though the power cord is not plugged in. (AAA
batteries are sold separately)
7. Platform- Weigh the food. Rotate to remove it when it is
not in use.
8. Lever- To begin the vacuum sealing process, turn the lever
to VAC. To use the digital scale or store the appliance, turn
the lever to SCALE.
9. Knife holder- Make a custom sized bag from a roll with the
knife. Store the knife in the knife holder after use.
10. AC power port- Plug in the power cord. Ensure the power
supply corresponds to the rated voltage indicated on this
appliance before plugging in.
11. DC power port- The input voltage is 12V. Use the DC
power plug conforming to international safety standard.
12. How to access to the DC power- This appliance provides
a 12V DC power port. Use a standard DC power cord to
connect the appliance to the car's 12V DC cigarette lighter
for power. It is convenient for users to keep food fresh
during self-driving travel.
Plug one end of the power cord into the cigarette lighter, then
plug the other end into the DC power port on the appliance.
Do not connect the appliance to cigarette lighter as soon as
you start the engine of the car. Otherwise, it may damage the
vacuum sealer.
Note: Do not connect the appliance to a 24V cigarette lighter
of some trucks. You can only use the DC power cord provided
by the manufacturer.
English