Programming; General Instructions - BARTEC BENKE HYGROPHIL HCDT Series Operating Manual

5
5.1
图标 含义
Icon Meaning
打开
Open
Quit menu
退出菜单
Abort
取消设置
Correct
更正
Take over, store
储存
HY GROPHIL® F 5673 Operating manual, Sof tware v ersion 1.8.x, 387897MDHEN (2013/4/26)

Programming

Various operating parameters and functions can be programmed in order to
operate the HY GROPHIL
adjust the measurement system to the given operating requirements and the
system environment.
运行参数和功能可以被编程，你可以针对特定运行要求和系统环境去调整
测量系统。
An overview of the menu structure in the programming mode can be found in
编程模式的菜单概况见章节 5-6。
section 5-6.

General instructions

In the programming mode, the humidity measurement goes on in the bac k-
在编程模式下，后台仍在继续进行湿度的测量。
ground.
After the return to the display mode, the indication is updated in accordance
with the new programming.
The following sections describe the principles of working wit h the different
menus and t he parameter settings.
设置的原则。
The keys can be assigned different functions whose current meaning is
按键能被分配不同的功能，当前的含义被作上记号。
marked by icons.
All keys are touch-sensitive, i.e. you need not press them but only touch
所有的按键是触摸式的，也就是说你不需要按压只需要触摸它们。
them.
效果
Effect
The mark ed menu is opened, for a marked parameter, an entry dialog or a
selection dialog is opened.
开进入会话或者选择会话。
You quit the menu that is open at present and change over to the super or-
退出目前打开的菜单，回到上一级菜单。
dinate menu.
You quit the menu that is open at present and change over to the super or-
退出目前打开的菜单，回到上一级菜单。
dinate menu.
Settings/entries already carried out are rejected.
In an entry dialog the character left to the cursor is deleted.
进入会话，光标左边的数字被删除。
The selected setting of a parameter is confirmed.
You quit the menu that is open at present.
All settings/entries (also of the subordinat e menus) are taken over and
所有的设定/进入（也含下级菜单）被接收而且储存。
stored.
All changes will only be stored if you quit the menu by means of thi s
如果你按这一个键退出菜单，所有的更改将只会被储存。
key!
编程
®
F 5673 humidity measurement system. You can
为了运行 HYGROPHIL® F 5673 湿度测量系统，一些
指令概述
返回到显示模式后，显示的是最新的编程值。
下面的部分描述的是不同的菜单和参数
带记号的菜单被打开，对于带记号的参数，打
退出当前打开的菜单。
编程
Programming
5-1
拒绝完成设置/进入。
确认选择参数的设置。