Sony XVS-9000-C Service Manual page 47

NMOS
This function makes the basic settings for NMOS. Click [Apply] to immediately apply the settings.
Item name Description
Enable/Disable Used to enable or disable the NMOS function.
Tip
The NMOS function and the NDCP function are mutually ex-
clusive. If the NMOS function is enabled, "LSM Enable" in XVS
MENU (7311.2) is forcibly changed to "Disable".
Network Interface Used to set the own network interface used for communication
with the NMOS controller.
IS-04 Node Port Used to enter the own standby port number to be used for NMOS
Discovery and Registration Specification (IS-04).
IS-05 Connection Used to enter the own standby port number to be used for NMOS
Port Device Connection Management Specification (IS-05).
Registration & Discovery (IS-04)
This function makes the settings for Registration Discovery Server (RDS) to discover and register devices. Click [Apply]
to immediately apply the settings.
Item name
Node Label
RDS Discovery
RDS Primary IP Ad-
dress
XVS-9000-C/XVS-8000-C/XVS-7000-C/XVS-6000-C
Description
Used to set the name of the board indicated by the
connected RDS.
Used to enable or disable the function that automat-
ically discovers RDS to be connected.
Used to set the address of the RDS to be connected.
This item is used when RDS Discovery is disabled.
Range or choices (under line: Ini-
tial value)
Enable
Disable
• XKS-C81XX
LAN1/1
LAN2/1
LAN1/1 or LAN2/1
• XKS-C91XX
LAN1-1/1
LAN1-2/1
LAN1-1/1 or LAN1-2/1
0 to 3001 to 65535
0 to 3002 to 65535
Range or choices (under line: Ini-
tial value)
Up to 64 ASCII code characters
Enable
Disable
0.0.0.0 to 255.255.255.255
Continued
1-35