KitchenAid KSEG950ESS Manual page 31

To Convert Gas Pressure Regulator (Propane Gas
to Natural Gas)
1. Move the range out about 1 ft (30.5 cm) from the wall.
2. Locate the gas pressure regulator at the lower right corner on
the back of the range.
A. Gas pressure regulator
IMPORTANT: Do not remove the gas pressure regulator.
3. Unscrew the metal cover and unscrew the blue regulator cap.
Keep the washer in place.
A
A. Metal cover
B. Washer
C. Blue regulator cap
4. Flip the blue regulator cap over and screw it back into the
metal cover.
A
A. Propane gas position
B. Natural gas position
5. Screw the metal cover securely back into place. Do not
overtighten.
To Convert Surface Burners (Propane Gas to
Natural Gas)
1. If they are installed, remove the burner grates.
2. Remove the burner caps.
3. Remove the burner base.
A
A
4. Apply masking tape to the end of a 9/32" (7 mm) nut driver to
B
help hold the gas orifice spud in the nut driver while changing
it. Press nut driver down onto the gas orifice spud and remove
by turning it counterclockwise and lifting out. Set gas orifice
C
spud aside.
B
A
A. Igniter electrode
B. Burner cap
C. Gas tube opening
D. Burner base
C
Large Burner
A. Burner cap
B. Burner base
C. Choke (for use with large burner, Propane gas
only)
B
A
C
A. Igniter electrode
B. Orifice spud
C. Orifice spud holder
D. Screws
B
C
D
A
B
D
31