KitchenAid KSEG950ESS Manual page 20

Hide thumbs Also See for KSEG950ESS:
Table of Contents

Advertisement

Available languages

Available languages

Electrical Connection Options
Electrical
And you will be
Connection Options
connecting to:
4-wire direct
A circuit breaker
3/8"
box or fused
(1.0 cm)
disconnect
5"
(12.7 cm)
4-Wire Connection: Direct Wire
Use this method for:
� New branch-circuit installations (1996 NEC)
� Mobile homes
� Recreational vehicles
� In an area where local codes prohibit grounding through the
neutral
1. Use a Phillips screwdriver to remove the ground-link screw
from the back of the range. Save the ground-link screw and
the end of the ground link under the screw.
2. Pull the wires through the strain relief on bottom of range.
Allow enough slack to easily attach wiring to the terminal
block.
A
D
E
A. Terminal block
B. Ground-link
screw
C. Cord/conduit
D. Bare (green)
ground wire
20
Go to Section:
4-Wire Connection:
Direct Wire
B
G
F
Line 2 (red) wire
E.
Nautral (white) wire
F.
Line 1 (black) wire
G.
3. Attach terminal lugs to line 1 (black), neutral (white), and line 2
(red) wires. Loosen (do not remove) the setscrew on the front
of the terminal lug and insert exposed wire end through
bottom of terminal lugs. Securely tighten setscrew to torque as
shown in the following Bare Wire Torque Specifications chart.
A. Terminal lug
B. Setscrew
C. Line 2 (red)
Bare Wire Torque Specifications
Attaching terminal lugs to the terminal block - 20 lbs-in
(2.3 N-m).
Wire Awg
8 gauge copper
6 gauge aluminium
4. Use a hex or Phillips screwdriver to connect the bare (green)
ground wire to the range with the ground-link screw and
ground-link section. The ground wire must be attached over
the ground-link section and must not contact any other
c
terminal.
5. Use 3/8" (1.0 cm) nut driver to connect the neutral (white) wire
to the center terminal block post with one of the 10-32 hex
nuts.
A
B
A. 10-32 hex nut
B. Line 2 (red)
C. Bare (green)
D. Ground-link
A
D
E
C
Natural (white) wire
D.
Line 1 (black) wire
E.
wire
Torque
25 lbs-in (2.8 N-m)
35 lbs-in (4.0 N-m)
D
E
C
Neutral (white) wire
E.
Line 1 (black) wire
F.
Terminal lug
G.
wire
ground wire
screw
B
G
F

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ksdg950ess

Table of Contents