Table of Contents
Advertisement
Safety Messages
WARNING!
To prevent serious injury or death:
• Read all safety warnings and all instructions.
• Always ride within your limits and the limits of your Lectric eBike.
• Bicycles are only for use by persons 18 years of age and above.
Riders must have the physical coordination, reaction, and mental
capabilities to control a bicycle and manage traffic, in addition to
managing road conditions and sudden situations with respect to
the laws and instructions governing bicycle use. Persons with any
mental or physical conditions that may make them susceptible
to injury, impair their physical dexterity or mental capabilities to
recognize, understand, and follow safety instructions—or understand
the hazards inherent to its use—should not use or be permitted to
use products inappropriate for their abilities.
• Never ride under the influence of drugs and/or alcohol.
• Consult a doctor before using the device if you have any medical
condition or issue that affects your ability to safely perform
physical activities, or if you:
◦ are or may be pregnant;
◦ have heart, respiratory, back, joint, or other orthopedic conditions;
◦ have high blood pressure;
◦ have difficulty with physical exercise; or
◦ have been instructed to restrict physical activity.
• Always keep small parts away from children. Some eBike
accessories may present a choking hazard to small children.
• Never modify your frame or bicycle in any way. Do not sand, drill,
file, or remove parts from your bicycle. Do not install incompatible
components or hardware.
• Always use proper lifting techniques to prevent injury. Your eBike
may be significantly heavier than a bicycle without a battery pack
and a motor.
• Take responsibility for your own SAFETY. If you have any questions
or do not understand any aspect of using or maintaining your bicycle,
contact Lectric eBikes at contact@lectricebikes.com or call (602)
715-0907.
L E CT R I C E B I K E S.C O M | 602.715.0907
6
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the XP 3.0 and is the answer not in the manual?
Questions and answers
How do you turn on the standard headlight and brake light for night riding?
To turn on the standard headlight and brake light on the Lectric XP 3.0 for night riding, first, make sure the bike is powered on by pressing the power button. Once the display is on, hold the "+" button on the handlebar control until the light symbol appears on the display. This indicates that the lights are on. The headlight will provide a forward beam, and the brake light will activate when braking.
This answer is automatically generated
@Jan Hangen Do the keys need to be engaged for the battery to work
how to charge battery
To charge the Lectric eBikes XP 3.0 battery:
1. Plug the charger cable into the battery pack's charging port.
2. Plug the charger power cable into a wall socket using the supplied AC power cord.
3. Ensure the battery is within the permitted charging temperature range.
4. Do not leave the battery unattended while charging.
5. Do not charge the battery for more than 12 hours.
6. When the charger light turns green, disconnect the charger from the battery and then from the wall socket.
7. If the battery was charged while in the bike frame, insert the rubber plug into the charging port to prevent dirt or water from entering.
This answer is automatically generated
Having trouble reconnecting the stem clamp
To reconnect the stem clamp on a Lectric eBikes XP 3.0:
1. Pull the handlebar stem to its upright position.
2. Push the latch in firmly until it locks in position.
3. Pull on the latch to confirm it is locked and the handlebars cannot fold.
This answer is automatically generated
I need a exploded view of the rear breaking system
How to turn on head light
To turn on the headlight on a Lectric eBikes XP 3.0, hold the plus (+) button on the display control pad for about 3 seconds until the light icon appears on the display.
This answer is automatically generated
I cannot find the voice associated the video?
How I turn on the voice with the video.
size of rear axle on XP 3.0
The rear axle on the Lectric XP 3.0 uses a 17-millimeter nut, as indicated by the need for a 17mm socket to loosen it.
This answer is automatically generated
ALINE THE FRONT WEAL WITH HANDLE BAR?
To align the front wheel with the handlebars on a Lectric eBikes XP 3.0, follow these steps:
1. Gather the necessary tools: a 5mm Allen socket, a 5mm Allen wrench, and a torque wrench.
2. Locate the two pinch bolts at the bottom of the stem.
3. Use the 5mm Allen wrench to evenly loosen both pinch bolts until the stem is loose enough to adjust.
4. Grip the handlebars and make small adjustments left and right until the display is lined up with the front tire and headlight.
5. Use the front fork to ensure proper alignment between the stem and handlebars.
6. Once aligned, use the 5mm Allen wrench to tighten the pinch bolts.
7. Torque the bolts down to 20 Nm using the torque wrench and 5mm Allen socket.
After completing these steps, the handlebars should be properly aligned, and the eBike is ready to ride.
This answer is automatically generated
How to line up front wheel to handle bar?
To align the front wheel with the handlebars on a Lectric eBikes XP 3.0:
1. Use a 5mm Allen wrench to evenly loosen the two pinch bolts located at the bottom of the stem until the stem is loose enough to adjust.
2. Grip the handlebars and make small left or right adjustments until the display is lined up with the front tire and headlight.
3. Use the front fork to ensure the stem and handlebars are properly spaced apart.
4. Once aligned, tighten the pinch bolts using the 5mm Allen wrench.
5. Torque the bolts down to 20Nm using a torque wrench with a 5mm Allen socket.
Now, the handlebars should be properly aligned and ready for riding.
This answer is automatically generated