Lectric eBikes XPeak Owner's Manual

Hide thumbs

Table Of Contents

OWNERS MANUAL

Lectric XPeak and XPeak ST 1.0

V 1.0 | 2023

www.lectricebikes.com

602.715.0907

To prevent PROPERTY DAMAGE, SERIOUS INJURY, or DEATH,

you should read, understand, and follow the warnings and

instructions in this manual. Keep for future reference.

L E CT R I C E B I K E S.C O M | 602.715.0907

Table of Contents

Summary of Contents for Lectric eBikes XPeak

Page 1 OWNERS MANUAL Lectric XPeak and XPeak ST 1.0 V 1.0 | 2023 www.lectricebikes.com 602.715.0907 To prevent PROPERTY DAMAGE, SERIOUS INJURY, or DEATH, you should read, understand, and follow the warnings and instructions in this manual. Keep for future reference. L E CT R I C E B I K E S.C O M | 602.715.0907...
Page 2 For replacement parts and accessories, you should always use Lectric eBikes approved parts, as they have been specially designed for your bicycle and manufactured to meet Lectric eBikes’ demanding standards. This manual should be considered a permanent part of your bicycle and should remain with the bicycle when it is sold.
Page 3: Table Of Contents
TABLE OF CONTENTS Important Safety Information Getting Started Assembly Features Cockpit System Preparing to Ride Your First Ride Battery Pack Moving and Storing your Lectric eBike Disposal of Your Lectric eBike Troubleshooting User Maintenance Instructions Legal Scan the QR code to find the latest version of your manual.
Page 4: Important Safety Information
Your Lectric eBike (XPeak) is classified as an EPAC (Electrically Power Assisted Cycle, otherwise known as a Pedelec), and is referred to in this manual as a bicycle unless otherwise noted.
Page 5 Intended Use The intended use of your Lectric eBike is to be ridden by one adult rider (age 18 and up) at an appropriate time and place for general transportation and/or recreational use. The intended use includes off-road use such as riding on gravel trails, hard packed dirt trails, and other surfaces where both wheels remain in contact with the ground at all times.
Page 6 • Take responsibility for your own SAFETY. If you have any questions or do not understand any aspect of using or maintaining your bicycle, contact Lectric eBikes at contact@lectricebikes.com or call (602) 715-0907. Helmets •...
Page 7 Follow eBike Regulations On and Off the Road • Be aware of eBike regulations in your area. Generally, the regulations for the use of an electric bicycle are the same as those for a standard bicycle. However, there may be local differences such as where you can ride, minimum rider age, or required equipment and license and registration regulations.
Page 8 Pre-Ride Safety Checklist Lectric eBikes recommends going through each item on the pre-ride safety checklist before and after each ride. Spending time to make sure all of the bike’s components are in good working order before a ride is a crucial step along the way to a safe and fun ride.
Page 9 Before each ride, inspect your eBike for damage. If damage is found, do not ride. Verify that the front and rear axles are secure. Check that the front and rear tire pressure is within the recommended pressure range printed on the tire sidewall.
Page 10 Only carry the cargo you need. More weight will drain the battery faster and affect how the bike handles. Ensure all components are properly secured. Make sure your battery is fully charged. L E CT R I C E B I K E S.C O M | 602.715.0907...
Page 11 Signal Words, Warnings, and Caution Statements This Manual contains many “Warnings” and “Cautions” concerning the consequences of failure to maintain or inspect your bicycle and of failure to follow safe cycling practices. DANGER Indicates a hazardous situation that, if not avoided, will result in death or serious injury.
Page 12 On-Product Warning Labels There are warning labels on your Lectric eBike for your protection. If a label is missing or is not legible, contact Lectric eBikes for a replacement. Seat Post label Class 2 label Class 3 label States that recognize three classes of eBikes require a label to be placed on the bicycle denoting the class of your Lectric eBike, the motor’s wattage rating, and the top speed of your Lectric eBike.
Page 13 On-Product Warning Tags There are warning tags on your Lectric eBike for your protection. If a tag is missing or is not legible, contact Lectric eBikes for a replacement. WARNING WARNING STEM WARNING TAG WARNING: BE SURE THE FRONT WHEEL AND HANDLEBAR/STEM ARE SECURE HELMET WARNING TAG BEFORE EACH RIDE.
Page 14: Getting Started
Lectric XPeak Lectric eBike Charger 2 Battery Keys If anything is missing or is damaged, contact Lectric eBikes immediately for assistance. For a video about how to setup your bicycle, visit our YouTube page: Lectric eBikes, youtube.com/LectriceBikes L E CT R I C E B I K E S.C O M | 602.715.0907...
Page 15 Bike Variations L E CT R I C E B I K E S.C O M | 602.715.0907...
Page 16 Serial Number Your serial number is located on the head tube of the bicycle as shown below. Please write it down inside the front cover of this manual. You may be asked for your bicycle’s serial number as part of a warranty request.
Page 17 Adjust Seat Height WARNING! • Always tighten fasteners to the correct torque to prevent serious injury or death. Bolts that are too tight can stretch and deform. Bolts that are too loose can move and fatigue. Either condition can lead to a sudden failure of the bolt and result in a crash. See “Tightening Torque”...
Page 18 To adjust seat height: • Loosen the seat post clamp. The open and closed positions of the seat post clamp are shown below (open position on right, closed position on left); • Raise or lower the seat post in the seat tube; •...
Page 19 Front and back adjustment: Loosen 14mm nuts on both sides of the seat with a 14mm socket or box wrench. Make sure the clamp mechanism is clamping on the straight part of the seat rails and is not touching the curved part of the rails. Ensure that you are using the recommended torque on the clamping fastener(s).
Page 20 Installing and Uninstalling Battery Pack WARNING! To prevent serious injury or death: • Only place battery pack on clean surfaces. Avoid getting dirt, e.g. sand or soil, in the charging port and contacts. • Do not charge or use battery pack if it is damaged. Contact Lectric eBikes to order a replacement.
Page 21 How to Install the Battery To Insert: 1. Align the battery to the tabs of the bottom battery plate first. 2. Slide the battery into the frame and push until you hear two clicks. How to Remove the Battery To Remove: 1.
Page 22 Charge Battery Before First Use Locate charging port on the side of the battery pack. Use this port to charge the battery pack on or off the bike. You should fully charge your battery before your first ride. Fire and explosion hazards. Never leave your battery pack unattended while charging to prevent serious injury or death.
Page 23 Tightening Torque Part Tool Spec Bottom Bracket BBT-22 40 Nm Brake Caliper Mounting Bolts 5mm hex wrench 10 Nm Brake Lever Clamp Bolt 4mm hex wrench 5 Nm Crank Bolts 8mm hex wrench 40 Nm Disc Rotor Mounting Bolts T-25 Torx 5-8 Nm Fender Mounting Bolts 4mm hex wrench...
Page 24: Assembly
ASSEMBLY Front Wheel Installation 1. Remove thru axle from the box with the charger. 2. Lay bike gently on the driveside* OR have a friend lift the bike by the handlebars to raise the front fork off the ground. *Be mindful to not damage the derailleur or other drivetrain components when laying the bike on the side. OPTION 1 OPTION 2 3.
Page 25 5. Slide the thru axle into the fork from the disc brake side. Push in until there is a firm stop and 0.25” gap between fork and thru axle endcap. Thru Axle 0.25” 6. Align the quick release lever with the cutout in the thru axle endcap. Begin turning the lever clockwise, keeping the lever open and in the slot.
Page 26 How to Remove and Insert Pedals Removing Pedals 1. Pull the spring-loaded sleeve while also pulling the pedal out from the hex slot. Inserting Pedals 1. Pull the spring-loaded sleeve 2. Be sure the sleeve retracts, and insert the pedal axle while and give the pedals a small tug aligning the hex pattern.
Page 27: Features
Lectric eBike PAS system (e.g. chainring, chainring receptacle, pedals) must only be replaced with identical components or components that have been specifically approved by Lectric eBikes. This should help protect the motor from overloading. • Always remove the battery pack from your Lectric eBike before beginning work (e.g.
Page 28 • Under extreme conditions, such as continuously high loads at low speed when riding up hills or carrying loads, parts of the motor can reach high temperatures. 7-Speed Gear System Your Lectric eBike comes with a 7-speed freewheel. The freewheel is the cluster of sprockets on the rear wheel of your bicycle.
Page 29 Suspension Fork The suspension fork will affect the handling of the bicycle, primarily when going over bumps and stopping. In some situations, it may be advantageous to lock the suspension so it is fully rigid. Check to ensure your suspension fork is properly adjusted for the terrain and your weight.
Page 30 Before riding, check to ensure the brake levers do not touch the handlebars when fully applied. If either lever touches the handlebars, call Lectric eBikes to determine next steps. You will likely need your brakes bled. To brake the rear wheels: Pull right brake lever to activate rear brakes.
Page 31 The hydraulic disc brakes on this bike use mineral oil. Only use mineral oil purchased from Lectric eBikes or Shimano for service. WARNING! Never add or mix with DOT brake fluid or any mineral oil not intended for bicycle hydraulic disc brake use.
Page 32: Cockpit System
COCKPIT SYSTEM Gear Cockpit Instruments Shifter Brake Levers LCD Display Thumb Control Pad Throttle LCD Display Display Controls Plus Button Power Button Minus Button L E CT R I C E B I K E S.C O M | 602.715.0907...
Page 33 Pedal Assist Overview When does the Pedal Assist activate? Pedal Assist (PAS) functions only when you are pedaling. If you do not pedal, the PAS will not activate. The motor output always depends on your pedaling and the PAS level you have set. PAS automatically switches off at the maximum speed set for your Lectric eBike (up to 28 mph).
Page 34 Display Functions Walk Mode, Cruise Control, and Pedal assist (PAS) Level Indicator Odometer, Trip A, Voltage, Current, Trip Timer (TM) readouts Battery level indicator bar Maximum and Average Speed Speedometer in MPH or KM/H Light On/Off Indicator Mile and kilometer indicators L E CT R I C E B I K E S.C O M | 602.715.0907...
Page 35 Battery Level Indicator Bar The “Energy Bar” near the top of the display is your battery indicator and shows the estimated charge level remaining in your battery pack. As the battery charge depletes, the remaining marks will display the approximate remaining charge in the battery pack. The battery display will flash when there is no charge remaining.
Page 36 Range Estimates The range the bicycle can go on a single battery charge can vary significantly between riders, terrain, wind conditions, user input, and additional cargo weight. Tips to Increase Range To get the maximum range out of each battery charge, there are some simple things you can do: •...
Page 37 Changing setting not listed in the following table may cause your bike to stop working properly. If you need the default setting values of setting not listed, contact Lectric eBikes. DO NOT ride your bicycle until the default settings have been restored.
Page 38 Setting Function Default Explanation Brightness Backlight display brightness. 1: Darkest, 2: Medium, 3: Brightest Distance 0: KM, 1: MILE. Units Sleep 0-60 Range LCD Display sleep timer. The default setting will turn the display OFF after it has not been used for 10 minutes.
Page 39 Setting Function Default Explanation Odometer Hold the plus (+) button for 5 seconds to Reset reset odometer. Walk Mode 0: Walk Mode disabled Toggle 1: Walk Mode enabled Assistance 0: PAS 1 limited to 9 mph PAS 2 limited to 15 mph Level 1: PAS 1 and 2 speed not limited 2: Throttle output not limited based on...
Page 40 WARNING! ALWAYS check your local laws and regulations to determine if it is lawful to ride Class 3 eBikes on public roads before increasing your bicycle’s top speed. Laws vary by territory, state, trail, path, and road so you will need to check the applicable regulations in each new location you ride.
Page 41 Cruise Control Cruise control on your Lectric XPeak works similarly to cruise control on a car. Cruise control can only be engaged when using the throttle. To activate cruise control: Throttle to your desired cruise speed then hold the minus button.
Page 42: Preparing To Ride
PREPARING TO RIDE WARNING! To prevent serious injury or death, go through the “Pre-Ride Safety Checklist” on page 8 of your Owner’s Manual before each ride. YOUR FIRST RIDE The acceleration of your Lectric eBike may be faster than anticipated, and may feel unusual at first.
Page 43 2. Select a Pedal Assist (PAS) level using the plus (+) and minus (-) buttons. PAS 0 provides no motor assist. PAS 1 is the lowest level of assist and PAS 5 is the highest level of assist. Plus Button Power Button Minus Button...
Page 44: Battery Pack
WARNING! Only use original Lectric eBike batteries for your eBike. Using other batteries can lead to injuries and pose a fire hazard. Lectric eBikes accepts no liability or warranty claims if other batteries are used. To prevent serious injury or death: •...
Page 45 Short circuit damage which occurs in this instance voids any and all warranty claims against Lectric eBikes. • Avoid mechanical loads and exposure to high temperatures. These L E CT R I C E B I K E S.C O M | 602.715.0907...
Page 46 • Only charge the battery using original Lectric eBikes chargers. When using chargers that are not made by Lectric eBikes, the risk of fire cannot be excluded. • Use the battery only in conjunction with your Lectric eBike. This is the only way in which you can protect the battery against dangerous overload.
Page 47 Other types of batteries may burst, causing personal injury and damage. • Only charge Lectric eBikes approved lithium-ion battery packs. The battery pack voltage must match the battery pack charging voltage of the charger. Otherwise, there is risk of fire and explosion.
Page 48 • Do not expose the charger to rain or wet conditions. If water enters a charger, there is a risk of electric shock. • Only use the original Lectric eBikes battery charger supplied with your eBike or one approved for your eBike by the manufacturer and purchased from a trusted source.
Page 49 Contact Lectric eBikes if you have any questions or to purchase a compatible replacement battery or charger. L E CT R I C E B I K E S.C O M | 602.715.0907...
Page 50 Battery Charging Information • Check the charger, charger cables, and battery for damage before beginning each charge. • Always charge in a safe area that is cool*, dry, indoors, away from direct sunlight, dirt, or debris, in a clear area away from potential to trip on the charging cords, or for damage to occur to the bike, battery, or charging equipment while parked and/or charging.
Page 51 To Charge: 1. Plug the cable from the charger into the port on the side of the battery pack. 2. Plug the charger power cable into an electrical mains wall socket. Note: Use only the supplied input connection: standard AC power cord when connecting to the household electrical supply.
Page 52 You may replace it yourself by purchasing a replacement battery pack from Lectric eBikes. L E CT R I C E B I K E S.C O M | 602.715.0907...
Page 53 Storage Conditions If possible, store the battery pack in a dry, well-ventilated place. Protect it from moisture and water. Always store your Lectric eBike battery pack in a location that: • Is in a room with a smoke alarm; • Is away from combustible or easily flammable objects;...
Page 54 Troubleshooting the Battery If you have any questions at all regarding the basic troubleshooting below, reach out to Lectric eBikes customer support by email at contact@lectricebikes.com, or call (602) 715-0907. Issue Most Common Solutions Charging indicator lights 1. Check that the cord is connected do not illuminate.
Page 55: Moving And Storing Your Lectric Ebike
MOVING AND STORING YOUR LECTRIC EBIKE Please observe storage temperatures for your Lectric eBike. Protect the Drive Unit, Cockpit System, and Battery Pack against extreme temperatures (e.g. from intense sunlight without adequate ventilation). Extreme temperatures can cause the components (especially the battery) to be damaged. WARNING! To prevent serious injury or death: •...
Page 56: Troubleshooting
TROUBLESHOOTING If you have any questions at all regarding the basic troubleshooting below, reach out to Lectric eBikes customer support by email at contact@lectricebikes.com, or call (602) 715-0907. Issue Most Common Solutions Bicycle will not turn ON. 1. Charge the battery until the light on the charger turns from red to green.
Page 57 Error Codes The components of your Lectric eBike are continuously monitored automatically. If a fault is detected, the corresponding error code will appear on the display. Error Code Meaning Most Common Solution Check PAS quick plug E003 PAS Sensor Fault E006 Battery Undervoltage Fully charge battery...
Page 58: User Maintenance Instructions
USER MAINTENANCE INSTRUCTIONS You should have your bicycle maintained at regular service intervals at your local bicycle shop. WARNING! To prevent serious injury or death: • NEVER open any of the components, including the battery, display, motor, or PAS sensor. Service should only be performed by a bicycle repair shop.
Page 59 Tune-Ups 100 Mile Tune-Up After 100 miles, or 5 full battery charge cycles, have the following services performed at a bicycle shop: • Check that your brakes are functioning correctly and adjust if necessary. • All hardware should be adjusted to the specified “Tightening Torque”...
Page 60 Tampering can void your warranty and render your bicycle noncompliant with the applicable laws and regulations. Lectric eBikes is not responsible for any direct, incidental, or consequential damages. This includes, without limitation, damages for personal injury, property damage or economic losses due to tampering.
Page 61: Legal
LEGAL Warranty LECTRIC EBIKES WARRANTS TO THE ORIGINAL REGISTERED PURCHASER THAT LECTRIC eBIKES SHALL BE FREE FROM ALL DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF ONE YEAR FROM THE DATE OF DELIVERY. DISCLAIMER OF CONSEQUENTIAL AND INCIDENTAL DAMAGES: THE...
Page 62 Lectric eBikes will replace any parts deemed to have been damaged during shipping. Shipping damage must be reported to Lectric eBikes within 14 days of shipment arrival. This applies to all products, including bikes and accessories.
Page 63 Lectric eBikes reserves the right to change its warranty at any time and without notice. Any action, lawsuit or other proceeding, under this warranty or otherwise related to the bike must be commenced within ninety (90) days after expiration of the one-year warranty period.
Page 64 Before every ride, fully inspect your bicycle to ensure everything is secured and adjusted properly. Under no circumstances is Lectric eBikes responsible for any damage resulting from damaged, defective, or improperly secured parts. This includes, but is not limited to, damage to personal property, personal injury, or death.
Page 65 This equipment complies with radio frequency exposure limits set forth by the FCC for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 5 mm between the device and the user or bystanders. This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Page 66 WARNING - When using this product, basic precautions should always be followed, including the following: A) Read all the instructions before using the product. B) To reduce the risk of injury, close supervision is necessary when the product is used near children. C) Do not put fingers or hands into the product.
Page 67 AVERTISSEMENT- Lors de l’utilisation de ce produit, il convient toujours de respecter des précautions élémentaires, notamment les suivantes: A) Lire toutes les directives avant d’utiliser le produit. B) Pour limiter les risques de blessure, exercer une surveillance étroite si le produit est utilisé à proximité d’enfants. C) Ne pas introduire les doigts ou les mains dans le produit.
Page 68 The latest version of your manual is available at lectricebikes.com/manual...

This manual is also suitable for:

Xpeak st 1.0

Lectric eBikes XPeak Owner's Manual

Table of Contents

Related Manuals for Lectric eBikes XPeak

Summary of Contents for Lectric eBikes XPeak

This manual is also suitable for:

Table of Contents