Lectric eBikes XP 3.0 Owner's Manual page 49

To install:
1. Fully insert battery pack into the
bicycle frame with the key removed.
The locking pin will be retracted.
2. Key position shown: UNLOCKED.
Insert the key into the battery through
the hole in the bottom of the frame.
Push the key into the battery and
continue pushing until you have
twisted the keys to the desired
position.
NOTE: When the battery is locked, the
locking pin will protrude through the
frame and will be visible. The locking
pin is located behind the frame latch.
3. Key position shown: OFF.
Turn the key clockwise. There will be
one audible click, and the locking pin
will now protrude through the frame.
In this position, the battery pack
will be secured to the frame, but the
power will not be active.
L E CT R I C E B I K E S.C O M | 602.715.0907
*Images are point of view from bottom of bike*
Locking Pin retracted
Locking Pin protruding
through frame
49