Lectric eBikes XP 3.0 Owner's Manual page 46

system malfunction, or electrical fire and consequent property
damage, injury, or death. Follow all recommendations to minimize
chance of water damage. If you have any questions, contact
Lectric eBikes.
• Keep battery charger clean. Contamination can lead to the risk of
an electric shock. Clean only with the use of a damp cloth (mild
soap/water) when the charger is unplugged from both the wall
and the bike.
• Keep the rubber plug inserted into the battery any time the battery
is in the bike to prevent water ingress.
CAUTION
To reduce the risk of fire, connect only to a circuit provided with
10 amperes maximum branch circuit overcurrent protection in
accordance with the National Electrical Code, ANSI/NFPA 70. Never
use extension cords with your Lectric eBikes charger provided with
the purchase of your ebike, after sales service, or warranty charging
devices.
WARNING!
Using a damaged battery or charger can create additional bike
damage or a fire hazard. Stop using your battery and charger and
contact Lectric eBikes immediately if any of the following occur:
(1) Your charger's flexible power cord or output cable or any of the
electrical cables on your bike is frayed, has broken insulation, or
any other signs of damage, (2) Your battery or charger is physically
damaged, non-functional, or performing abnormally, (3) Your battery
or charger experienced a significant impact from a fall or crash, with
or without obvious signs of damage, or (4) Your charger becomes
too hot to touch (it's designed to get warm with normal use), gives
off an odor, or shows other signs of overheating. Store any damaged
battery or charger in a safe location and, as soon as possible,
recycle or otherwise dispose of it according to local rules. Contact
Lectric eBikes if you have any questions or to purchase a compatible
replacement battery or charger.
L E CT R I C E B I K E S.C O M | 602.715.0907 46