Table of Contents
Advertisement
o Tilt the appliance backward at a maximum angle of 35°. Unscrew
o
o
Get user manuals:
See SafeManuals.com
the leg support screws (C) - left and right, and remove the leg
support cover (D). Then place it on the opposite side. Unscrew,
remove and then replace the position of the end switch (E) and
decorative peg (F) (for models with forced door closing system).
Unscrew the three screws fixing the bottom hinge and then fix
the bottom hinge on the opposite side.
Repeat the procedure 3 and 4 on the bottom door. In case there
is no bottom door limit peg, transfer the bearing (G) and washer
to the opposite side of the door.
To fit the doors on the opposite side of the fridge freezer proceed
with the above procedure in reverse.
28
Advertisement
Table of Contents
