Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Baumatic BRZ600.5
Summary of Contents for Baumatic BRZ600.5
- Page 1 BRZ600.5 Built-Under Freezer...
- Page 2 USER MANUAL FOR YOUR BAUMATIC BRZ600.5 107 litre Built-under freezer NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference, for you or any person not familiar with the operation of the appliance.
-
Page 3: Table Of Contents
13-15 Defrosting the freezer 14-15 Installation 15-26 Electrical connection 15-16 Positioning 16-17 Aperture and appliance dimensions Supplied installation components Installing your freezer 18-23 Ventilation requirements Reversing the door of your appliance 24-25 Troubleshooting 25-26 Technical data Baumatic consumables Contact details... -
Page 4: Environmental Note
Environmental note Note : Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person. Disable the door lock to make sure that children cannot get stuck inside the appliance. -
Page 5: Important Safety Information
It is suitable for storing food that needs to be kept frozen. If it is used for any other purpose or it is not used correctly, then Baumatic Ltd. will accept no liability for any damage that may be caused. - Page 6 Service You should not attempt to repair the appliance yourself, as this could cause injury or a more serious malfunction. If you require a service call then please contact the Baumatic Customer Care Department.
-
Page 7: Specifications Of Your Freezer
Specifications of your freezer o Total gross capacity: 107 litres o Total net capacity: 95 litres o Manual defrost o Freezing capacity: 9 kg / 24 hours o Adjustable thermostat o Temperature rise warning light o 3 Freezer drawers o Reversible door o Door-on-door fittings o Ice-cube tray Dimensions of appliance... -
Page 8: Description Of The Appliance
Description of the appliance 1) Thermostat dial 2) Freezer drawers Using your freezer Before switching on o Make sure that it has been installed by a suitably qualified person, as per the information contained in the installation instructions. o After delivery, wait for eight hours before connecting the appliance to your mains supply. -
Page 9: During First Use
o The interior of the appliance should be cleaned with a solution of sodium bicarbonate dissolved in lukewarm water. The interior and accessories should be thoroughly dried, after the cleaning process has been completed. o There can be an odour when you first switch on the appliance. It will lessen as the appliance starts to cool. -
Page 10: Arranging And Storing Food In The Freezer
o Position <SF> will cause the compressor to run continuously with maximum performance. The freezer temperature will decrease appliance will switch lowest temperature. This can be used for food that needs to be frozen quickly. You should place the food to be frozen quickly ideally in the middle drawer. - Page 11 o For optimum appliance performance and to reach maximum freezing capacity, turn the thermostat dial to the <SF> position when placing fresh food in the freezer. o After placing fresh food in the freezer, 24 hours on <SF> mode is generally sufficient. After 24 hours you should deactivate the <SF>...
-
Page 12: Making Ice-Cubes
o Warm food should be allowed to cool down before you attempt to freeze it. If you place warm food in the freezer section, then the increased humidity will cause quicker ice formation and increase the amount of power that the appliance uses. Making ice-cubes o When making ice-cubes, fill the ice tray 2/3 with water and place it in the freezer compartment. -
Page 13: Cleaning And Maintenance
Usage: o Do not open the door repeatedly or more frequently than you have to. o Do not set the thermostat too low. A change of just one degree can effect the energy consumption by 5%. Use a thermometer to check the temperature. -
Page 14: Defrosting The Freezer
o Clean the accessories separately with soap and water. Do not clean them in a dishwasher. o Do not use abrasive products, detergents or soaps. o After washing the appliance, wipe over the area that you have cleaned with a damp cloth and then dry it thoroughly. o When cleaning is complete, dry your hands and then reconnect the plug to your mains supply. -
Page 15: Installation
o Clean the interior by hand using lukewarm water and a little detergent. NEVER use abrasive products or aggressive cleaning agents. o Dry the inside of the appliance and plug in the mains. Set the thermostat dial to position <5> for 24 hours before resetting the thermostat dial to the normal position. -
Page 16: Positioning
o Your freezer comes supplied with a 13 amp plug fitted. If in future you need to change the fuse in this plug, then a 13 amp ASTA approved (BS 1362) fuse must be used. o The wiring in the mains lead is coloured as follows: Brown Live Blue... -
Page 17: Aperture And Appliance Dimensions
o You should check whether there is an electrical socket available, which will be accessible after your appliance is installed. Aperture and appliance dimensions o The diagram above shows the aperture size that you will need to be able to install your appliance. Supplied installation components o The diagrams below show the contents of the supplied installation kit and the tools you will require to carry out the... -
Page 18: Installing Your Freezer
Tools required 7) Water gauge 8) Wrench 9) Setsquare 10) Screwdriver Installing your freezer If you need the appliance door to open from the other side, then please reverse the door before commencing the installation process. (See “Reversing the door” section). o Remove the screw (5) at the top of the appliance and place the top bracket (6) in its place. - Page 19 o Fix the bracket with the screw (5). o Take out the gasket (11) located on the side panel and remove the protective tape. o Stick the gasket on the reverse side of the door hinges of the appliance. o You should use a water gauge (7) to ensure the appliance is level.
- Page 20 o Slide the appliance into the kitchen unit and align the hinge surface with the front surface of the kitchen unit using a setsquare (9). o Screw the hinges and metal bracket to the kitchen unit using screws (1). o Unscrew and remove the nuts and washers from the appliance door.
- Page 21 o Dimension B: Measure from the underside surface of the kitchen unit to the bottom of the door hang. o Dimension C: Measure from the underside surface of the kitchen unit to the top of the next unit door. o Subtract measurement C from measurement B. Place the door hang (2) using this dimension for the vertical position and place it in the centre for the horizontal position.
- Page 22 o Close the door and check the alignment with the other cabinet doors. Make the adjustment of the unit door by screwing or unscrewing the adjustment bolts using a screwdriver (10) for vertical adjustment and by the help of the slots on the door hang for other directions.
-
Page 23: Ventilation Requirements
o Slide the hang cover (4) onto the door hang. o Position the plinth providing a minimum 25 mm gap between the cabinet door and fix it. NOTE: There are ventilation slots in the front of this appliance. If the height of the plinth covers any of the ventilation slots, then a cut-out must be made in the plinth to ensure that all of the ventilation slots are exposed. -
Page 24: Reversing The Door Of Your Appliance
Reversing the door of your appliance Caution! After unscrewing any of the fixing hinges, hold the door to prevent it from falling and causing damage. Any parts that you remove from the appliance whilst reversing the door, should be retained for later use. o Unscrew the screws on the front surface of the appliance door. -
Page 25: Troubleshooting
Assemble the appliance door. Troubleshooting IMPORTANT: If your freezer appears not to be operating properly, before contacting the Baumatic Customer Care Department, please refer to the checklist below. My freezer does not appear to be working/there is no power to my appliance. - Page 26 Or any installation other than the one specified by Baumatic Ltd. has been completed. Please refer to the conditions of guarantee that appear on the...
-
Page 27: Technical Data
Technical Data Manufacturer BAUMATIC Model Number BRZ600.5 Product Category 8 – Upright Freezer Energy Efficiency Class (1) Annual Energy Consumption (2) 187 kWh Storage Volume of Fridge Compartment Storage Volume of Freezer 95 litres Compartment Star Rating Frost Free Compartments... -
Page 28: Baumatic Consumables
BC005 Stainless Steel Cleaner and Protector (250 ml) o BC007 E-Cloth – General Purpose Cloth o BC008 Microwave Cover To order a Baumatic consumable product please call 0123 5437 244 and quote the product code. You can also order online from eshop.baumatic.co.uk... -
Page 29: Contact Details
United Kingdom Czech Republic Baumatic Ltd., Baumatic CR s.r.o. Baumatic Buildings, Lípovà 665 6 Bennet Road, 460 01 Liberec 4 Reading, Berkshire Czech Republic RG2 0QX United Kingdom +420 483 577 200 Sales Telephone www.baumatic.cz (0118) 933 6900 Sales Fax...
Need help?
Do you have a question about the BRZ600.5 and is the answer not in the manual?
Questions and answers