Replacing A License Plate Light Bulb - Yamaha Super Tenere ABS XT1200Z 2019 Owner's Manual

Periodic maintenance and adjustment
Replacing a license plate light
bulb
1. Remove the license plate light unit
bolts.
1
1. License plate light unit
2. License plate light unit bolt
2. Remove the license plate light
bulb socket (together with the
bulb) by turning it counterclock-
wise, and then pulling it out.
1
1. License plate light bulb socket
3. Remove the burnt-out bulb by
pulling it out.
EAU49722
2
1. License plate light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by pushing it in, and then
turning it clockwise until it stops.
6. Place the license plate light unit in
the original position, and then in-
stall the bolts.
6-38
1
6