Rainfall 24 Hour Alarm; Rainfall 1 Hour Alarm - La Crosse Technology WS-2310 Software Manual

“heavy weather” software

Hide thumbs Also See for WS-2310:

Table of Contents

8.18 Wind Direction Alarm Setting

1) Place your cursor over the wind direction alarm box and right click the mouse to open the wind direction

alarm window

2) Click on the wind direction(s) required for activating the wind direction alarm (the example below uses

North East, East and South East direction settings, if these wind directions are reached, then the alarm

will activate)

3) Click the alarm active box to set the alarm

4) Click the set button to confirm

5) The wind direction alarm is now set and will activate when the set wind direction is reached (for setting the

wind direction alarm from the base station, see main instruction manual).

Note: The alarm bell icon may not appear immediately on the Heavy Weather program since it may take few

seconds for the program to calculate and confirm the setting

Once the alarm is entered into the Heavy Weather program, the information will be transferred to the

base station. In some situations, the alarm icon may not appear immediately on the base station's

LCD but will appear after a short delay due the constant data communication between all the

sensors, base station and the PC.

8.19 Rainfall 24 Hour Alarm Setting

1) Place your cursor over the rain 24 hour alarm box and right click the mouse to open the rain 24 hour

alarm window

2) Drag the cursor over the sliding scale to set the desired rainfall level or enter the rainfall in the box

provided