La Crosse Technology WS-2310 Software Manual page 18

“heavy weather” software

Hide thumbs Also See for WS-2310:

Table of Contents

8.12 Dew Point High Alarm Setting

1) Place your cursor over the dew point high alarm box and right click the mouse to open the dew point high

alarm window

2) Drag the cursor over the sliding scale to set the desired dew point temperature or enter the temperature in

the box provided

3) Click the alarm active box to set the dew point high alarm

4) Click the set button to confirm

5) The dew point high alarm is now set and will activate when the set dew point temperature level is reached

(for setting the dew point high alarm from the base station, see main instruction manual).

Note: The alarm bell icon may not appear immediately on the Heavy Weather program since it may take few

seconds for the program to calculate and confirm the setting

Once the alarm is entered into the Heavy Weather program, the information will be transferred to the

base station. In some situations, the alarm icon may not appear immediately on the base station's

LCD but will appear after a short delay due the constant data communication between all the

sensors, base station and the PC.

8.13 Dew Point Low Alarm Setting

1) Place your cursor over the dew point low alarm box and right click the mouse to open the dew point low