La Crosse Technology WS-2310 Software Manual page 13

“heavy weather” software

Hide thumbs Also See for WS-2310:

Table of Contents

8.2 Relative or Absolute Pressure High Alarm Setting

1) Place your cursor over the relative or absolute pressure high alarm box and right click the mouse to open

the relative or absolute pressure alarm high window

2) Drag the cursor over the sliding scale to set the desired inHg pressure high or enter the inHg quantity in

the box provided

3) Click the alarm active box to set the relative or absolute pressure high alarm

4) Click the set button to confirm

5) The relative or absolute pressure alarm high alarm is now set and will activate when the set inHg level is

reached (for setting relative or absolute pressure high alarm setting from the base station, see main

instruction manual).

Note: The alarm bell icon may not appear immediately on the Heavy Weather program since it may take few

seconds for the program to calculate and confirm the setting

Once the alarm is entered into the Heavy Weather program, the information will be transferred to the

base station. In some situations, the alarm icon may not appear immediately on the base station's

LCD but will appear after a short delay due the constant data communication between all the

sensors, base station and the PC.

8.3 Absolute or Relative Pressure Low Alarm Setting

1) Place your cursor over the absolute or relative pressure low alarm box and right click the mouse to open

the relative or absolute pressure low alarm window

2) Drag the cursor over the sliding scale to set the desired inHg pressure low or enter the inHg in the box

provided

3) Click the alarm active box to set the absolute or relative pressure low alarm

4) Click the set button to confirm

5) The absolute or relative pressure low alarm is now set and will activate when the set inHg level is reached

(for setting the absolute or relative pressure low alarm setting from the base station, see main instruction

manual).