La Crosse Technology WS-2310 Software Manual page 14

“heavy weather” software

Hide thumbs Also See for WS-2310:

Table of Contents

8.4 Indoor Humidity High Alarm Setting

1) Place your cursor over the indoor humidity high alarm box and right click the mouse to open the indoor

humidity high alarm window

2) Drag the cursor over the sliding scale to set the desired indoor humidity high or enter the humidity in the

box provided

3) Click the alarm active box to set the indoor humidity high alarm

4) Click the set button to confirm

5) The indoor humidity high alarm is now set and will activate when the set indoor humidity level is reached

(for setting the indoor humidity high alarm setting from the base station, see main instruction manual).

Note: The alarm bell icon may not appear immediately on the Heavy Weather program since it may take few

seconds for the program to calculate and confirm the setting

Once the alarm is entered into the Heavy Weather program, the information will be transferred to the

base station. In some situations, the alarm icon may not appear immediately on the base station's

LCD but will appear after a short delay due the constant data communication between all the

sensors, base station and the PC.

8.5 Indoor Humidity Low Alarm Setting

1) Place your cursor over the indoor humidity low alarm box and right click the mouse to open the indoor

humidity low alarm window

2) Drag the cursor over the sliding scale to set the desired indoor humidity low or enter the humidity in the

box provided

3) Click the alarm active box to set the indoor humidity low alarm