La Crosse Technology WS-2310 Software Manual page 20

“heavy weather” software

Hide thumbs Also See for WS-2310:

Table of Contents

8.16 Wind Speed High Alarm Setting

1) Place your cursor over the wind speed high alarm box and right click the mouse to open the wind speed

high alarm window

2) Drag the cursor over the sliding scale to set the desired wind speed or enter the wind speed in the box

provided

3) Click the alarm active box to set the wind speed high alarm

4) Click the set button to confirm

5) The wind speed high alarm is now set and will activate when the set wind speed is reached (for setting the

wind speed high alarm from the base station, see main instruction manual).

Note: The alarm bell icon may not appear immediately on the Heavy Weather program since it may take few

seconds for the program to calculate and confirm the setting

Once the alarm is entered into the Heavy Weather program, the information will be transferred to the

base station. In some situations, the alarm icon may not appear immediately on the base station's

LCD but will appear after a short delay due the constant data communication between all the

sensors, base station and the PC.

8.17 Wind Speed Low Alarm Setting

1) Place your cursor over the wind speed low alarm box and right click the mouse to open the wind speed

low alarm window