Table of Contents
Advertisement
RangeLAN2 7100 is designed to be very easy to install and
operate. If you do experience difficulties, however, use the
information in this chapter to help diagnose and solve the prob-
lem. If you cannot resolve the problem, contact Proxim, as
described in Appendix F, "How to Reach Technical Support."
How to Obtain Help with Your LAN Installation
If you require assistance to install your LAN, Proxim can put you
in touch with a RangeLAN2 Reseller in your area. The reseller is
an expert in the design, installation, and maintenance of LANs
and will be able to examine your needs and recommend the most
cost-effective solution for your LAN whether you are installing a
new LAN or adding on to an existing one. For the location of the
RangeLAN2 reseller nearest you, contact Proxim at
800-229-1630 and ask for the Sales Department.
RangeLAN2 7100 LEDs
There are four LEDs on the RangeLAN2 7100 card:
The red LED in the upper right is on steady when the
card is acting as a Master. There should be only one
card on the subnetwork with this light on at any time.
The yellow LED in the upper left is lit when the
RangeLAN2 7100 card is synchronized to a Master.
The bottom yellow LED flickers as an indication that the
card is communicating with another radio.
The bottom green LED lights whenever the card detects
another unit that is transmitting.
8. Troubleshooting
55
Advertisement
Table of Contents
