Installing Drivers Using The Nos Installation - Proxim RangeLAN2 752 Series Manual

After configuring, choose <Test / Utilities> to verify your selec-
tions do not conflict with other devices in the PC.
Note:
RL2SETUP may not run properly unless there are 512
Kbytes available DOS memory before the utility is
executed. Also, note that RL2SETUP will load only if
the RangeLAN2 driver is not already loaded in DOS
memory.

Installing Drivers Using the NOS Installation

In general, most Network Operating Systems (NOS's) have an
installation procedure. A general overview of NOS installation
procedures using the RangeLAN2 drivers is described here.
At some point in the installation, the user is asked to pick from a
list of network interface cards. Look for an "OEM-supplied"
option which will allow you to supply the diskette containing the
RangeLAN2 software drivers. The RangeLAN2 driver to be
installed is usually either RL2ISA.COM or RL2ISA.DOS.
32