Ndis - Protocol.ini - Proxim RangeLAN2 752 Series Manual

channel
subchannel
master_name MASTER
mac_optimize
roam_config
peer_to_peer

NDIS - PROTOCOL.INI

[RL2ISA]
DriverName=rl2isa$
Int=15
Port=0x270
Channel=1
Subchannel=1
Sets the Channel to be used when this
1
machine is acting as the Master. It is a
number between 1 and 15.
Sets the Subchannel to be used when this
1
machine is acting as the Master. It is a
number between 1 and 15.
Sets the name of this machine when it is
acting as a Master. The Master Name may be
up to 11 characters in length with no spaces.
Optimizes for the number of concurrent
1
nodes. Choose Light (0) or Normal (1).
Sets the roaming speed. Choose Fast (2),
1
Normal (1), or Slow (0).
Turns on or off the ability to talk to other
Y
RangeLAN2 peers.
Sets Interrupt (IRQ) line. Valid options
are 3, 4, 5, 7, 10, 11, 12, or 15.
Sets the I/O Port Address. This Port must
match the dip switch setting.
Sets the Channel to be used when this
machine is acting as the Master. It is a
number between 1 and 15.
Sets the Subchannel to be used when
this machine is acting as the Master. It is
a number between 1 and 15.
34