Table of Contents
Advertisement
Open the Device Manager (located within the Control Panel's
System icon) and double-click the RangeLAN2 7100 ISA Net-
work Adapter entry (this entry should have an "!" next to it).
Click the Resources tab and manually change the resource set-
tings for the card to find other available resources which the card
can use.
Click <OK> for these new settings to take effect and restart the
computer when prompted. After the computer restarts, the
RangeLAN2 Windows 2000 driver should be loaded success-
fully.
However, if you continue to experience installation problems, see
Chapter 8 for more troubleshooting suggestions.
Reinstalling the Windows 2000 Driver
If at any time you need to reinstall the Windows 2000 driver,
follow these steps:
1.
Right-click the RangeLAN2 Status Monitor icon located in
the Windows System Tray to launch the Status Monitor
information screen. Click <Exit App> to close the Status
Monitor application.
2.
Open the Control Panel and double-click the System icon.
3.
Select the Hardware tab.
4.
Click the <Device Manager> button.
5.
Expand the Network adapters category and right-click the
"Proxim RangeLAN2 7100 ISA Network Adapter" entry.
24
Advertisement
Table of Contents
