Advertisement
Quick Links
Care and Cleaning:
Never use abrasives or abrasive cleaning agents to clean this product. Clean regularly with
contamination free warm soapy water and a damp soft cloth.
Periodically the stream shaper should be removed as shown below and cleaned under running water.
Methven warrants this product against manufacturing defects and that it is suitable for use
under the general operating conditions specified in this instruction sheet. However, regional
regulations apply and may affect your warranty. Please refer to www.methven.com or call
customer service for full details.
New Zealand
IS
Australia
MINIMALIST MK BASIN MIXER
Installation Guide
Technical Specifications:
Operating Pressure:
Min: 150kPa/1.5bar
Max: 1000kPa/10bar*
Optimum: 150kPa/1.5bar - 500kPa/5bar
Operating Temperature:
Hot: Max 80°C*
Cold: Min 5°C
Inlet Connections:
All ½" BSP
* Regional specific regulations apply.
Please refer to your warranty statement at
www.methven.com
UK
ISSUE B
www.methven.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for METHVEN MK2
Summary of Contents for METHVEN MK2
- Page 1 Periodically the stream shaper should be removed as shown below and cleaned under running water. Methven warrants this product against manufacturing defects and that it is suitable for use under the general operating conditions specified in this instruction sheet. However, regional regulations apply and may affect your warranty.
- Page 2 General: Cut a single hole minimum Mixer Assembly 35mm/maximum 38mm • Methven recommends this product is installed diameter into the mounting by a licensed plumber in compliance with all surface. relevant regional regulations. Assemble o-ring to the •...
Need help?
Do you have a question about the MK2 and is the answer not in the manual?
Questions and answers