Advertisement
Table of Contents
Care and Cleaning:
Never use abrasives or abrasive cleaning agents to clean this product. Clean regularly with
contamination free warm soapy water and a damp soft cloth.
Periodically the stream shaper should be removed as shown below and cleaned under running water.
Methven warrants this product against manufacturing defects and that it is suitable for use
under the general operating conditions specified in this instruction sheet. However, regional
regulations apply and may affect your warranty. Please refer to www.methven.com or call
customer service for full details.
New Zealand
IS
Australia
MINIMALIST MK
WALL MOUNTED BATH SPOUT
Installation Guide
Technical Specifications:
Operating Pressure:
Min: 35kPa/0.35bar
Max: 1000kPa/10bar*
Optimum: 150kPa/1.5bar - 500kPa/5bar
Operating Temperature:
Hot: Max 80°C*
Cold: Min 5°C
Inlet Connections:
All ½" BSP
* Regional specific regulations apply.
Please refer to your warranty statement at
www.methven.com
UK
ISSUE A
www.methven.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for METHVEN MINIMALIST MK2
Summary of Contents for METHVEN MINIMALIST MK2
- Page 1 Periodically the stream shaper should be removed as shown below and cleaned under running water. Methven warrants this product against manufacturing defects and that it is suitable for use under the general operating conditions specified in this instruction sheet. However, regional regulations apply and may affect your warranty.
- Page 2 IMPORTANT: Please read all of the instructions before installation. IMPORTANT: Before you begin, turn off the water supply. General: Step 1 • Methven recommends this product is installed by a licensed plumber in compliance with all relevant regional regulations. • Wall lining hole should be cut to •...
Need help?
Do you have a question about the MINIMALIST MK2 and is the answer not in the manual?
Questions and answers