Backup Vx7 Files Using Activesync; Prerequisites; Vx7 And Activesync Partnership; Serial Port Transfer - LXE VX7 Reference Manual

Backup VX7 Files using ActiveSync

Backup VX7 Files using ActiveSync
Using Microsoft ActiveSync version 3.7 or higher, you can synchronize information on your
desktop computer with the VX7 and vice versa. Synchronization compares the data on your VX7
with your desktop computer and updates both with the most recent data.
For example, you can:
If the VX7 is connected to a PC by a RS-232 or USB cable, disconnect the cable from the VX7
and reconnect.
Check that the correct connection is selected (Serial or USB "Client").
Note:
When installation of ActiveSync is complete on your desktop computer, the ActiveSync Setup
Wizard begins and starts the following processes:
Because ActiveSync is already installed on your device, your first synchronization process begins
automatically when you finish setting up your desktop computer in the ActiveSync wizard.

Prerequisites

VX7 and ActiveSync Partnership

A partnership between the VX7 and ActiveSync has been established. See section "ActiveSync –
Initial Setup" in Chapter 1 "Introduction", "Getting Started".

Serial Port Transfer

E-EQ-VX7RG-H
•
Back up and restore your device data.
•
Copy (rather than synchronize) files between your device and desktop computer.
•
Control when synchronization occurs by selecting a synchronization mode. For
example, you can synchronize continually while connected to your desktop
computer or only when you choose the synchronize command.
By default, ActiveSync does not automatically synchronize all types of information. Use
ActiveSync Options to specify the types of information you want to synchronize. The
synchronization process makes the data (in the information types you select) identical on
both your desktop computer and your device.
•
connect your device to your desktop computer,
•
set up a partnership so you can synchronize information between your device and
your desktop computer, and
•
customize your synchronization settings.
•
A desktop or laptop PC with an available serial port and a VX7 with a serial port.
The desktop or laptop PC must be running Windows 95, 98, NT, 2000 or XP.
•
Null modem cable with all control lines connected. LXE recommends using the null
modem cable part number listed in Chapter 1 "Introduction", subsection
"Accessories".
131
VX7 Reference Guide