Table of Contents
Advertisement
Cyberdyne Digital Battery Gauge
Low Voltage Indicator
When battery voltage reaches a level
that is too low, the meter flash on and
off. When this happens, battery voltage
is at 11.0 volts indicating that the
battery is either not receiving sufficient
charge or the battery needs charged or
replaced. If this occurs, disconnect the
battery from the machine and charge it
per the battery manufacturers
recommended instructions.
If battery voltage should ever drop to
10.0 volts, the gauge will display "LO" and the "LO" will scroll across the face of
the gauge. If this happens, disconnect the battery and verify that it is good. If
necessary, re-charge or replace the battery.
High Voltage Indicator
Although having too high of a battery voltage is unusual and rarely occurs, it can
happen. If the battery voltage should ever reach 15.8 Volts, the gauge will flash
as a warning. If the voltage ever reaches 16.5 volts, the word "HI" will scroll
across the face of the gauge. If either of these conditions occur, disconnect the
battery form the machine. Then have your vehicle charging system checked
since a normal vehicle charging voltage at the battery is approximately 14.5-15.0
volts DC.
13
Advertisement
Table of Contents
