28
Endcap
Tethered Scanners
Do not connect a tethered scanner cable to a mobile device's USB-C or USB-H labeled endcap
port. These ports cannot power a tethered scanner.
Tethered scanners are not supported by the MX3-RFID.
USB Port
The USB port requires a 9-pin to USB cable (available from LXE). The 9-pin port/USB port also
supports serial data transfer (using a null modem cable) and non-host USB I/O at 1.5 Mbps. The
operating system automatically detects the USB cable configuration. Refer to section titled
"Accessories" in this guide for part numbers for the 9-pin USB cable and the null modem cable.
MX3-RFID User's Guide
RFID Module – COM1
IR Port – COM2
Integrated Scanner on Endcap – COM3
USB Client on Endcap – USB-C
Endcaps and COM Ports
E-EQ-MX3RFIDOGWW-A