Passive Cradle Assembly Components; Figure 31 Ram Bracket Kit Components - LXE MX3 User Manual

Microsoft windows ce .net equipped

Hide thumbs Also See for MX3:

Table of Contents

Before installation begins, verify you have the applicable vehicle mounting RAM ball assembly

components necessary for your mount type, as shown in the section titled "Passive Cradle

Assembly Components".

Do not slide the mobile device into the passive cradle until the cradle is securely fastened to

the vehicle.

Passive Cradle Assembly Components

Note:

Passive Cradle

RAM Ball and Arm Cylinder

Mount the RAM ball to the bottom of the cradle with the bolts, washers and nuts supplied by

LXE.

MX3-RFID User's Guide

LXE does not supply the bolts or washers needed when mounting the RAM ball to the

vehicle chassis. LXE recommends using bolts with a maximum 10/32" (0.3125) diameter.

The Passive Vehicle Cradle

Qty 4 - Hex Cap 1/4-20 x 3/4 bolts

Qty 4 - 1/4 flat washer

Qty 4 - 1/4-20 nylon insert lock nuts

E-EQ-MX3RFIDOGWW-A

Table of Contents

Mx3-rfid