Lenovo Moto E5
Level 2 – Service and Repair Manual
4.
Place the Lower PCB Cover and the Lower
PCB Board into the pocket on the Front
Housing as shown.
5.
Press down on the Lower PCB Cover until it
snaps into position.
6.
Use a fingertip to press down on the Main
Flex BtB Connector to connect it to the Lower
PCB.
7.
Use the Torque Driver and JCIS #0 Bit to
tighten the 4 JCIS #0 Machine Screws to 1.0
± 0.10 in-lb (0.11 ± 0.01 N∙m).
PAGE 71
04/20/2018
Lenovo Confidential Restricted:
Do not share without consent from Lenovo