Lenovo Moto E5 Service And Repair Manual page 21

Lenovo Moto E5
Level 2 – Service and Repair Manual
9. Push the alignment pin on the Insert into the
Headset Jack opening on the phone as shown.
10. Press down on the Display/Battery Inlay
Removal Fixture handle to bring the suction cups
in contact with the Battery Inlay. Make sure all
suction cups are attached to the Battery Inlay.
// CAUTION //
Use care when pressing down on the
Display/Battery Inlay Removal Fixture handle.
Damage to the phone may occur.
11. T urn on the Heat Gun and set the temperature to
2 0 B
80 °C (176 °F). Allow the Heat Gun to warm up
for 2-3 minutes.
/ / CAUTION //
1 5 5 2 B
D o not set the Heat Gun temperature higher than
1 4 6 6 B
80 °C (176 °F). Damage to the phone may occur.
/ / CAUTION //
1 5 5 3 B
W ear protective gloves when handling heated
1 4 6 7 B
phones.
12. Use the Heat Gun to warm the phone edges for
about 3 minutes. Keep the Heat Gun in motion to
avoid damaging the phone.
PAGE 21
04/20/2018
Lenovo Confidential Restricted:
Do not share without consent from Lenovo