Lenovo Moto E5 Service And Repair Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Cell Phone
  5. Moto E5 Play
  6. Service and repair manual
Lenovo Moto E5 Service And Repair Manual

Lenovo Moto E5 Service And Repair Manual

Hide thumbs Also See for Moto E5:
Table of Contents

Advertisement

Quick Links

Download this manual
Lenovo Moto E5
04/20/2018
Lenovo Moto Moto E5
Level 2 – Service and Repair Manual

Advertisement

Table of Contents
loading

Related Manuals for Lenovo Moto E5

Summary of Contents for Lenovo Moto E5

  • Page 1 Lenovo Moto E5 04/20/2018 Lenovo Moto Moto E5 Level 2 – Service and Repair Manual...

  • Page 2: Revision History

    Lenovo Moto E5 Level 2 – Service and Repair Manual EVISION ISTORY Revision Date Notes 04/20/2018 Initial release. 04/20/2018 Lenovo Confidential Restricted: PAGE 2 Do not share without consent from Lenovo...

  • Page 3: Table Of Contents

    Rear-Facing Imager Removal ............................45 Front-Facing Imager Removal ............................. 46 Lower PCB and Cover Removal ........................... 47 Vibrator Conductive Foam Removal ..........................49 Vibrator Removal ................................. 50 Battery Removal ................................51 Lenovo Confidential Restricted: PAGE 3 Do not share without consent from Lenovo...
  • Page 4 Battery Inlay Adhesive Assembly: Manual Method ....................... 90 Fingerprint Sensor Assembly ............................92 Battery Inlay Assembly: Manual Method ........................93 Safety Certification Label Application .......................... 96 SIM/SD Card Tray Assembly ............................97 Lenovo Confidential Restricted: PAGE 4 Do not share without consent from Lenovo...

  • Page 5: List Of Tables

    Table 1. External Views Parts List ........................... 8 Table 2. Assembly Exploded View Parts List ........................9 ABLE OF IGURES Figure 1. External Views..............................7 Figure 2. Assembly Exploded View ..........................9 04/20/2018 Lenovo Confidential Restricted: PAGE 5 Do not share without consent from Lenovo...

  • Page 6: Safety Information

    Ensure screws and screwdrivers do not contact the Battery. Failure to adhere to Safety Critical Note(s) may increase risk of rupture, burning, or failure to function safely when used by the customer. 04/20/2018 Lenovo Confidential Restricted: PAGE 6 Do not share without consent from Lenovo...

  • Page 7: Introduction

    Lenovo Moto E5 Level 2 – Service and Repair Manual NTRODUCTION External Views 04/20/2018 Figure 1. External Views Lenovo Confidential Restricted: PAGE 7 Do not share without consent from Lenovo...

  • Page 8: Table 1. External Views Parts List

    Description Headset Jack Proximity Sensor Speaker Mesh Front-Facing Flash SIM/SD Door Main Lens Volume Key Power Key Imager Deco Rear-Facing Imager Rear-Facing Flash Primary Microphone USB Port 04/20/2018 Lenovo Confidential Restricted: PAGE 8 Do not share without consent from Lenovo...

  • Page 9: Exploded Views

    XT1944-1 MB_SS&6818AA000056 CS XT1944-6 MB_DS&6818AA000052 CS XT1944-5 MB_DS&6818AA000050 CS XT1922-18 BR PCBA XT1944 Rear housing&7601AA000031 CS XT1944-1 Rear housing_NFC&7601AA000033 C LC+Y5070SK000022+L3100_RearHousing_Top_P LC+Y43150007+LXF_L3100_cable_line LC+Y5030SK000011+L3120_Cam lens BLK_qj LC+5011SK000176+L3120Batterycase GRY_lm LC+5011SK000081+L3120Batterycase GL_lm Lenovo Confidential Restricted: PAGE 9 Do not share without consent from Lenovo...
  • Page 10 XT1922 BAT Adhesive&5420AA000044 CS XT1922 R-Housing Adhesive&5420AA000042CS XT1922 R-cam lens Adhesive5420AA000033CS XT1922 CAM Deco Adhesive&5420AA000045CS XT1922 FPS FPC Adhesive&5420AA000038CS LC+Y46809726+LXF_L3100_R_Flash foam1 LC+Y54509504+LXF_L3100_Vibra Gaket1 LBL,IMEI,IMEI,GHOST LC+5420AA000078+Cam Deco Adhesive XT1922 Motor FPC Adhesive&5420AA000036CS Lenovo Confidential Restricted: PAGE 10 Do not share without consent from Lenovo...
  • Page 11 LC+5011SK000176+L3120Batterycase GRY_lm LC+5011SK000081+L3120Batterycase GL_lm LC+Y50109573+LXF_L3100_Sub_Mic_WX XT1944 BATcover Adhe_Bot&5420AA000114CS XT1944 BATcover Adhe_L&5420AA000113CS XT1944 BATcover Adhe_R&5420AA000112CS *Refer to this table as a reference to parts listed in the Assembly section. Lenovo Confidential Restricted: PAGE 11 Do not share without consent from Lenovo...

  • Page 12: Disassembly And Recovery

    Microphone Imager Pads Grommet Grommet Copper Foil Vibrator Lower PCB & Vibrator Conductive Cover Foam Coax Cable Battery Main Flex *Shaded parts may be eligible for parts recovery. Lenovo Confidential Restricted: PAGE 12 Do not share without consent from Lenovo...

  • Page 13: Tools Required For Disassembly

    7″ x 7″ Hot Plate Display/Battery Inlay Removal Fixture MR-M2-001 Moto E6 Play Insert MR-M2-001-024 04/20/2018 Phone Heating Plate 3-00-U3-10000 SIM/SD Tray Removal Tool 4-00-U2-10000 Blackstick JCIS #0 Bit Lenovo Confidential Restricted: PAGE 13 Do not share without consent from Lenovo...
  • Page 14 Torque Driver (Adjustable) Shim 4-00-5L-10000 Thin Plastic Spudger 0-00-00-40826 Suction Cup Pliers Tweezers (Plastic or Plastic-Tipped) Tweezers (Metal) 04/20/2018 ESD Mat and Wrist Strap Gloves or Finger Collets Lenovo Confidential Restricted: PAGE 14 Do not share without consent from Lenovo...

  • Page 15: Sim/Sd Tray Removal

    (4-00-U2-10000) into the SIM/SD Tray hole. Push the SIM/SD Tray Removal Tool into the SIM/SD Tray hole until the SIM/SD Tray ejects from the phone. Remove the SIM/SD Tray from the phone. 04/20/2018 Lenovo Confidential Restricted: PAGE 15 Do not share without consent from Lenovo...

  • Page 16: Water Detection Label Inspection

    If a Water Detection Label (WDL) has been activated, the phone’s warranty no longer applies. Inspect the WDL inside the SIM/SD Tray Slot for signs of activation. 04/20/2018 Lenovo Confidential Restricted: PAGE 16 Do not share without consent from Lenovo...

  • Page 17: Imei Label Removal

    Level 2 – Service and Repair Manual IMEI Label Removal NOTE After you remove the IMEI Label, you cannot reuse it. Use the Tweezers to remove the IMEI Label from the SIM/SD Tray. 04/20/2018 Lenovo Confidential Restricted: PAGE 17 Do not share without consent from Lenovo...

  • Page 18: Battery Inlay Removal

    Remove the phone from the Heating Plate or the oven. // CAUTION // Wear protective gloves when handling heated phones. NOTE Perform the Battery Inlay removal procedure before the phone starts to cool off. Lenovo Confidential Restricted: PAGE 18 Do not share without consent from Lenovo...
  • Page 19 Display/Battery Inlay Removal Insert (if present) in place. Remove the Insert. 04/20/2018 Orient the Moto E5 Removal Insert in relation to the Display/Battery Inlay Removal Fixture as shown. Place the Insert in the Display Removal Fixture.
  • Page 20 NOTE Perform the Battery Inlay removal procedure before the phone starts to cool off. Firmly press the phone into the Insert, with the Battery Inlay facing up. Lenovo Confidential Restricted: PAGE 20 Do not share without consent from Lenovo...
  • Page 21 1 4 6 7 B phones. 12. Use the Heat Gun to warm the phone edges for about 3 minutes. Keep the Heat Gun in motion to avoid damaging the phone. Lenovo Confidential Restricted: PAGE 21 Do not share without consent from Lenovo...
  • Page 22 Display/Battery Inlay Removal Fixture to open the phone. 16. Use the Thin Plastic Spudger to cut any remaining adhesive connecting the Battery Inlay to the Front Housing. Lenovo Confidential Restricted: PAGE 22 Do not share without consent from Lenovo...
  • Page 23 Battery Inlay and the Front Housing. Use the Shim to pry up the Battery Inlay. Start at the point shown. Lift up along the edge of the phone. Lenovo Confidential Restricted: PAGE 23 Do not share without consent from Lenovo...
  • Page 24 Carefully lift the Battery Inlay away from the Rear Housing. // CAUTION // Use care not to disconnect the Fingerprint Sensor (FPS) Flex from the Battery Inlay when removing the Rear Housing. Lenovo Confidential Restricted: PAGE 24 Do not share without consent from Lenovo...
  • Page 25 FPS away from the opening in the Battery Inlay, taking care not to disengage the FPS Flex from the Main PCB. Remove the Battery Inlay, exposing the Rear Housing as shown. 04/20/2018 Lenovo Confidential Restricted: PAGE 25 Do not share without consent from Lenovo...

  • Page 26: Fps Flex Removal

    Use the Tweezers to remove the FPS Flex Cover from the Rear Housing. 04/20/2018 Use the Thin Plastic Spudger to disengage the FPS Flex BtB Connector from the Main PCB. Lenovo Confidential Restricted: PAGE 26 Do not share without consent from Lenovo...
  • Page 27 Lenovo Moto E5 Level 2 – Service and Repair Manual Use your fingers to remove the FPS Flex from the Main PCB. 04/20/2018 Lenovo Confidential Restricted: PAGE 27 Do not share without consent from Lenovo...

  • Page 28: Screw Tampering Label Inspection

    Inspect the Screw Tampering Labels located on 2 corners of the Rear Housing. Verify they are correctly placed and examine them for signs of tampering. 04/20/2018 Lenovo Confidential Restricted: PAGE 28 Do not share without consent from Lenovo...

  • Page 29: Rear Housing Removal

    Insert the Thin Plastic Spudger between the Rear Housing and the Front Housing and disengage the snaps. Continue to disengage the snaps around the edges of the Rear Housing. Lenovo Confidential Restricted: PAGE 29 Do not share without consent from Lenovo...
  • Page 30 Lenovo Moto E5 Level 2 – Service and Repair Manual Disengage the Rear Housing from the Front Housing. Remove the Rear Housing from the Front Housing. 04/20/2018 Lenovo Confidential Restricted: PAGE 30 Do not share without consent from Lenovo...

  • Page 31: Rear-Facing Imager Lens And Deco Removal

    Use the Tweezers to remove the Conductive Foam from the Rear-Facing Imager Deco. NOTE Remove the Conductive Foam on the Rear-Facing Imager Deco only if necessary. After you remove it, you cannot reuse it.. Lenovo Confidential Restricted: PAGE 31 Do not share without consent from Lenovo...
  • Page 32 Use the Thin Plastic Spudger to carefully pry the Rear-Racing Imager Deco from the Rear Housing. 04/20/2018 Use your fingers to remove the Imager Deco from the Rear Housing. Lenovo Confidential Restricted: PAGE 32 Do not share without consent from Lenovo...

  • Page 33: Factory Track Id Label Removal

    You will need to reprint and attach a new label. Use the Tweezers to remove the Factory Track ID Label from the shield on the Main PCB. 04/20/2018 Lenovo Confidential Restricted: PAGE 33 Do not share without consent from Lenovo...

  • Page 34: Side-Key Flex Removal

    Use the Thin Plastic Spudger to disengage the Side-Key Flex from the wall of the Front Housing. Use the Tweezers to pull the Side-Key Flex from the recess in the Front Housing. Lenovo Confidential Restricted: PAGE 34 Do not share without consent from Lenovo...

  • Page 35: Earpiece Speaker Removal

    After you remove the Earpiece Speaker, you cannot reuse it. Use the pointed end of the Blackstick to pry the Earpiece Speaker from the pocket on the Front Housing as shown. 04/20/2018 Lenovo Confidential Restricted: PAGE 35 Do not share without consent from Lenovo...

  • Page 36: Main Pcb Removal

    Use the Thin Plastic Spudger to disengage the Battery Flex BtB Connector from the Main PCB. Use the Plastic Tweezers to disengage the Coax Cable BtB Connector from the Main PCB. Lenovo Confidential Restricted: PAGE 36 Do not share without consent from Lenovo...
  • Page 37 Use the pointed end of the Blackstick to gently lift the corner of the Main PCB as shown. Remove the Main PCB from the pocket on the Front Housing. 04/20/2018 Lenovo Confidential Restricted: PAGE 37 Do not share without consent from Lenovo...

  • Page 38: Headset Jack Grommet Removal

    Headset Jack Grommet Removal NOTE The Headset Jack Grommet can be recovered and reused after removal. Use the Tweezers to remove the Headset Jack Grommet from the Headset Jack. 04/20/2018 Lenovo Confidential Restricted: PAGE 38 Do not share without consent from Lenovo...

  • Page 39: Secondary Microphone Grommet Removal

    The Secondary Microphone Grommet can be recovered and reused after removal. Use the Tweezers to remove the Secondary Microphone Grommet from the pocket on the Front Housing. 04/20/2018 Lenovo Confidential Restricted: PAGE 39 Do not share without consent from Lenovo...

  • Page 40: Primary Microphone Copper Foil Removal (Brazil Only)

    Copper Foil only if necessary. After you remove it, you cannot reuse it. Use the Tweezers to remove the Primary Microphone Copper Foil from the Front Housing. 04/20/2018 Lenovo Confidential Restricted: PAGE 40 Do not share without consent from Lenovo...

  • Page 41: Wdl Inspection

    Level 2 – Service and Repair Manual WDL Inspection NOTE If a WDL has been activated, the phone’s warranty no longer applies. Inspect the WDL on the Main PCB for signs of activation. 04/20/2018 Lenovo Confidential Restricted: PAGE 41 Do not share without consent from Lenovo...

  • Page 42: Main Pcb Silicone Pad Removal

    Main PCB Silicone Pad Removal NOTE After you remove the PCB Silicone Pads, you cannot reuse them. Use the Tweezers to remove the three Silicone Pads from the Main PCB. 04/20/2018 Lenovo Confidential Restricted: PAGE 42 Do not share without consent from Lenovo...

  • Page 43: Side Key Removal

    Volume-Control Key from the outside of the Front Housing. Use the pointed end of the Blackstick to carefully push the Power-Control Key from the outside of the Front Housing. 04/20/2018 Lenovo Confidential Restricted: PAGE 43 Do not share without consent from Lenovo...

  • Page 44: Proximity Sensor Grommet Removal

    Proximity Sensor Grommet Removal NOTE The Proximity Sensor Grommet can be recovered and reused after removal. Use the Tweezers to remove the Proximity Sensor Grommet from the Proximity Sensor. 04/20/2018 Lenovo Confidential Restricted: PAGE 44 Do not share without consent from Lenovo...

  • Page 45: Rear-Facing Imager Removal

    Use the Thin Plastic Spudger to disengage the Rear-Facing Imager BtB Connector from the Main PCB. Use your fingers to lift the Rear-Facing Imager from the opening in the Main PCB. 04/20/2018 Lenovo Confidential Restricted: PAGE 45 Do not share without consent from Lenovo...

  • Page 46: Front-Facing Imager Removal

    Use your fingers to lift the Front-Facing Imager from the opening in the Main PCB. Use the Tweezers to remove the Front-Facing Imager Grommet from the Front-Facing Imager 04/20/2018 Lenovo Confidential Restricted: PAGE 46 Do not share without consent from Lenovo...

  • Page 47: Lower Pcb And Cover Removal

    Front Housing. NOTE Use care when lifting the Lower PCB Cover free from the Battery Inlay. The Lower PCB is fastened to the underside of the Lower PCB Cover. Lenovo Confidential Restricted: PAGE 47 Do not share without consent from Lenovo...
  • Page 48 After you remove the Machine Screw, you cannot reuse it. Remove the Lower PCB from the Lower PCB Cover. Use the Plastic Tweezers to disengage the Coax Cable from the Lower PCB. 04/20/2018 Lenovo Confidential Restricted: PAGE 48 Do not share without consent from Lenovo...

  • Page 49: Vibrator Conductive Foam Removal

    After you remove it, you cannot reuse it. Use the Tweezers to remove the Vibrator Conductive Foam from the Vibrator. 04/20/2018 Lenovo Confidential Restricted: PAGE 49 Do not share without consent from Lenovo...

  • Page 50: Vibrator Removal

    Rear Housing. Use the pointed end of the Blackstick to pry the Vibrator from the pocket in Rear Housing. Remove the Vibrator from the Rear Housing. 04/20/2018 Lenovo Confidential Restricted: PAGE 50 Do not share without consent from Lenovo...

  • Page 51: Battery Removal

    Adhesive Tabs located on the top of the Battery. Use your fingers to hold the Battery Adhesive Tab and keep it level. Pull on the Tab until the Adhesive comes out from underneath the Battery. Lenovo Confidential Restricted: PAGE 51 Do not share without consent from Lenovo...
  • Page 52 Lenovo Moto E5 Level 2 – Service and Repair Manual Use your fingers to pry up the Battery from the Front Housing. Remove the Battery from the Front Housing. 04/20/2018 Lenovo Confidential Restricted: PAGE 52 Do not share without consent from Lenovo...

  • Page 53: Coax Cable Removal

    The Coax Cable can be recovered and reused after removal. Use the Plastic Tweezers to remove the Coax Cable from the recess in the side of the Front Housing. 04/20/2018 Lenovo Confidential Restricted: PAGE 53 Do not share without consent from Lenovo...

  • Page 54: Main Flex Removal

    Remove the Main Flex only if it is damaged. After you remove it, you cannot reuse it. Use your fingers to peel away the Main Flex from the Front Housing as shown. 04/20/2018 Lenovo Confidential Restricted: PAGE 54 Do not share without consent from Lenovo...

  • Page 55: Parts Refresh

    The following tools are required for parts refresh of the E5 phone. Description Part # Image Blackstick Tweezers (Plastic or Plastic-Tipped) ESD Mat and Wrist Strap Gloves or Finger Collets Isopropyl (ISP) Alcohol Cleaning Pads 04/20/2018 Lenovo Confidential Restricted: PAGE 55 Do not share without consent from Lenovo...

  • Page 56: Front Housing Cleaning

    Front Housing. Use ISP Alcohol and the flat end of the Blackstick to remove any excess adhesive from where the Battery Inlay was attached to the Front Housing. 04/20/2018 Lenovo Confidential Restricted: PAGE 56 Do not share without consent from Lenovo...

  • Page 57: Rear Housing Cleaning

    Rear Housing Cleaning Use ISP Alcohol and the flat end of the Blackstick to remove any excess adhesive from where the Rear Housing attached to the Battery Inlay. 04/20/2018 Lenovo Confidential Restricted: PAGE 57 Do not share without consent from Lenovo...

  • Page 58: Battery Inlay Cleaning

    Level 2 – Service and Repair Manual Battery Inlay Cleaning Use ISP Alcohol and the flat end of the Blackstick to remove any excess adhesive from the Battery Inlay. 04/20/2018 Lenovo Confidential Restricted: PAGE 58 Do not share without consent from Lenovo...

  • Page 59: Assembly

    04/20/2018 Fixtures for Press Unit 3-00-U2-10000 3 mm Allen Wrench Blackstick JCIS #0 Bit Torque Driver (Adjustable) Tweezers (Plastic or Plastic-Tipped) Tweezers (Metal) ESD Mat and Wrist Strap Lenovo Confidential Restricted: PAGE 59 Do not share without consent from Lenovo...
  • Page 60 Lenovo Moto E5 Level 2 – Service and Repair Manual Description Part # Picture / Drawing Gloves or Finger Collets 04/20/2018 Lenovo Confidential Restricted: PAGE 60 Do not share without consent from Lenovo...

  • Page 61: Assembly Map

    Imager Grommet Grommet 04/20/2018 Rear-Facing Earpiece Imager and Battery Speaker Deco Assembly Battery Inlay Fingerprint Rear Adhesive Sensor Housing Safety Certification IMEI Label Battery Inlay Label SIM/SD Tray Lenovo Confidential Restricted: PAGE 61 Do not share without consent from Lenovo...

  • Page 62: Side-Key Flex Assembly

    Flex into the pocket on the Front Housing as shown. Use the Thin Plastic Spudger to secure the Side-Key Flex to the inside wall of the Front Housing. 04/20/2018 Lenovo Confidential Restricted: PAGE 62 Do not share without consent from Lenovo...

  • Page 63: Side Key Assembly

    Key into the opening in the Front Housing as shown. Use the Tweezers to place the Side-Key Retaining Clip over the tabs on the Side Keys and over the rim of the Front Housing as shown. Lenovo Confidential Restricted: PAGE 63 Do not share without consent from Lenovo...

  • Page 64: Main Flex Assembly

    The word “Main” on the Flex should be near the pocket for the Main PCB. Slide a fingertip over the Main Flex to secure it to the Front Housing. 04/20/2018 Lenovo Confidential Restricted: PAGE 64 Do not share without consent from Lenovo...

  • Page 65: Coax Cable Assembly

    Make sure the cable is centered in the recess so there is sufficient room for the Cable BtB Connector to reach the BtB Connectors on the Main PCB and the Lower PCB. 04/20/2018 Lenovo Confidential Restricted: PAGE 65 Do not share without consent from Lenovo...

  • Page 66: Vibrator Conductive Foam Assembly

    Use the Tweezers to place the Vibrator Conductive Foam in the location shown. Press down on the Foam for 5 seconds to secure the Conductive Foam to the Vibrator. 04/20/2018 Lenovo Confidential Restricted: PAGE 66 Do not share without consent from Lenovo...

  • Page 67: Vibrator Assembly

    Use the flat end of the Blackstick to attach the Vibrator Flex onto the Lower PCB Cover. Press down on the Vibrator to secure the Vibrator to the Lower PCB Cover. Lenovo Confidential Restricted: PAGE 67 Do not share without consent from Lenovo...

  • Page 68: Secondary Microphone Grommet Assembly

    Use the Tweezers to place the Adhesive into the pocket on the Front Housing. Use the Tweezers to secure the Microphone Grommet into the pocket on the Front Housing as shown. 04/20/2018 Lenovo Confidential Restricted: PAGE 68 Do not share without consent from Lenovo...

  • Page 69: Primary Microphone Copper Foil Assembly (Brazil Only)

    Primary Microphone Copper Foil into the pocket on the Front Housing as shown. Slide a fingertip across the Copper Foil to secure it to the Front Housing. 04/20/2018 Lenovo Confidential Restricted: PAGE 69 Do not share without consent from Lenovo...

  • Page 70: Lower Pcb Assembly

    Connector as shown. Use the Torque Driver and JCIS #0 Bit to tighten the 1 JCIS #0 Machine Screw to 1.0 ± 0.10 in-lb (0.11 ± 0.01 N∙m). Lenovo Confidential Restricted: PAGE 70 Do not share without consent from Lenovo...
  • Page 71 Flex BtB Connector to connect it to the Lower PCB. Use the Torque Driver and JCIS #0 Bit to tighten the 4 JCIS #0 Machine Screws to 1.0 ± 0.10 in-lb (0.11 ± 0.01 N∙m). 04/20/2018 Lenovo Confidential Restricted: PAGE 71 Do not share without consent from Lenovo...

  • Page 72: Headset Jack Grommet Assembly

    XT1944-6 MB_DS&6818AA000052 CS XT1944-5 MB_DS&6818AA000050 CS XT1922-18 BR PCBA LC+Y506010061+LXF_L3100_Ear_Rub_JM Use the Tweezers to secure the Headset Jack Grommet over the Headset Jack on the Main PCB as shown. 04/20/2018 Lenovo Confidential Restricted: PAGE 72 Do not share without consent from Lenovo...

  • Page 73: Rear-Facing Flash Grommet Assembly (Brazil Only)

    Use the Tweezers to place the Rear-Facing Flash Grommet around the Rear-Facing Flash as shown. Press down on the Grommet to secure it to the Main PCB. 04/20/2018 Lenovo Confidential Restricted: PAGE 73 Do not share without consent from Lenovo...

  • Page 74: Rear-Facing Imager Assembly

    Rear-Facing Imager to the connection on the Main PCB. Attach the Conductive Cloth from the Rear- Facing Imager BtB to the Heat Shield on the Main PCB as shown. 04/20/2018 Lenovo Confidential Restricted: PAGE 74 Do not share without consent from Lenovo...

  • Page 75: Front-Facing Imager Assembly

    Use your fingers to place the Front-Facing 04/20/2018 Imager into the opening on the Main PCB as shown. Use Rolling pressure to connect the Front- Facing Imager BtB Connector to the Main PCB. Lenovo Confidential Restricted: PAGE 75 Do not share without consent from Lenovo...

  • Page 76: Proximity Sensor Grommet Assembly

    XT1944-6 MB_DS&6818AA000052 CS XT1944-5 MB_DS&6818AA000050 CS XT1922-18 BR PCBA LC+Y506010060+LXF_L3100sensor_Rub_JM Use the Tweezers to secure the Proximity Sensor Grommet onto the Proximity Sensor on the Main PCB as shown. 04/20/2018 Lenovo Confidential Restricted: PAGE 76 Do not share without consent from Lenovo...

  • Page 77: Main Pcb Silicone Pad Assembly

    Small (S948C29226,5.2*5.2*0.8) • Medium (S948C29227,6*4.2*0.4mm) • Large (S948C29225, 10*10*0.4mm) • SMALL 04/20/2018 Press on each Silicone Pad for 5 seconds to secure them to the Main PCB Shield. Lenovo Confidential Restricted: PAGE 77 Do not share without consent from Lenovo...

  • Page 78: Main Pcb Foam Assembly (Brazil Only)

    Remove the Main PCB from the Fixture. Use the Tweezers to place the Down- Face Main PCB Foam into the nest on the Fixture, aligning with the pins as shown. Lenovo Confidential Restricted: PAGE 78 Do not share without consent from Lenovo...
  • Page 79 Place the Main PCB into the Fixture with the top facing up. Press down on the Main PCB to secure the Foam to the PCB. Remove the Main PCB from the Fixture. 04/20/2018 Lenovo Confidential Restricted: PAGE 79 Do not share without consent from Lenovo...

  • Page 80: Wdl Assembly

    XT1944 TP LCM ASSY_GL&5079AA000019 CS XT1944 TP LCM ASSY_GR&5079AA000018 CS LC+Y70151569+LXF_L3600_A01LDI_label Place the WDL on the Front Housing, next to the SIM/SD Tray slot in the location shown. 04/20/2018 Lenovo Confidential Restricted: PAGE 80 Do not share without consent from Lenovo...

  • Page 81: Main Pcb Assembly

    Front Housing as shown. Take care that the Main Flex and Display Flex BtB Connectors are above the Main PCB as you place it into the pocket. Lenovo Confidential Restricted: PAGE 81 Do not share without consent from Lenovo...
  • Page 82 Connector as a depth guide. Slide a fingertip across the Side-Key Flex ZIF Connector Door to close it. Use the Tweezers to attach a piece of Kapton Tape over the ZIF Connector. Lenovo Confidential Restricted: PAGE 82 Do not share without consent from Lenovo...

  • Page 83: Battery Assembly

    Peel the liners from the 2 Battery Adhesives. Place the Battery into the pocket on the Front Housing as shown. Press down on the Battery for 5 seconds to secure it to the Battery Adhesives. Lenovo Confidential Restricted: PAGE 83 Do not share without consent from Lenovo...
  • Page 84 Fold over the black tabs on the 2 Battery Adhesives onto the top of the Battery. Press down on each tab for 5 seconds to secure them to the Battery. 04/20/2018 Lenovo Confidential Restricted: PAGE 84 Do not share without consent from Lenovo...

  • Page 85: Earpiece Speaker Assembly

    Make sure the copper contacts on the Earpiece Speaker are oriented as shown. Press down on the Earpiece Speaker for 5 seconds to secure it to the Front Housing. 04/20/2018 Lenovo Confidential Restricted: PAGE 85 Do not share without consent from Lenovo...

  • Page 86: Rear-Facing Imager Lens And Deco Assembly

    Remove the adhesive from the back of the Rear-Facing Imager Deco. Use the Tweezers to place the Adhesive on the Rear Housing, aligning the Adhesive with 04/20/2018 the pins on the Rear Housing as shown. Lenovo Confidential Restricted: PAGE 86 Do not share without consent from Lenovo...
  • Page 87 Place the Imager Lens over the Adhesive as shown. Press down on the Imager Lens for 5 seconds to secure it to the Imager Lens. Remove the liner from the Imager Lens. 04/20/2018 Lenovo Confidential Restricted: PAGE 87 Do not share without consent from Lenovo...

  • Page 88: Rear Housing Assembly

    Rear Housing. 04/20/2018 Position the Rear Housing over the back of the phone as shown. Lower the Rear Housing into position on the Front Housing as shown. Lenovo Confidential Restricted: PAGE 88 Do not share without consent from Lenovo...
  • Page 89 Conductive Foam on the Main PCB as Shown. Use the Torque Driver and JCIS #0 Bit to tighten the 11 JCIS #0 Machine Screw to 1.0 ± 0.10 in-lb (0.11 ± 0.01 N∙m). 04/20/2018 Lenovo Confidential Restricted: PAGE 89 Do not share without consent from Lenovo...

  • Page 90: Battery Inlay Adhesive Assembly: Manual Method

    Use the Tweezers to carefully place the Top Battery Inlay Adhesive on the Battery Inlay, aligning with the highlighted snap joints as shown. Lenovo Confidential Restricted: PAGE 90 Do not share without consent from Lenovo...
  • Page 91 Inlay, aligning with the highlighted snap joints as shown. Use the Tweezers to carefully place the Fingerprint Sensor Adhesive on the Battery Inlay, aligning with the highlighted snap joints as shown. 04/20/2018 Lenovo Confidential Restricted: PAGE 91 Do not share without consent from Lenovo...

  • Page 92: Fingerprint Sensor Assembly

    Peel the liner from the FPS Adhesive. Place the FPS onto the FPS Adhesive in the position shown. Press down on the FPS for 5 seconds to secure it to the Battery Inlay. 04/20/2018 Lenovo Confidential Restricted: PAGE 92 Do not share without consent from Lenovo...

  • Page 93: Battery Inlay Assembly: Manual Method

    The 2 Machine Screws holding the FPS Flex Cover are different sizes.The larger screw goes into the hole in the lower left corner of the Flex Cover as shown. Larger Screw Lenovo Confidential Restricted: PAGE 93 Do not share without consent from Lenovo...
  • Page 94 11. Place both thumbs on point 9 and slide them out to point 10. 12. Place both thumbs on point 11 and slide them out to point 12. 04/20/2018 Lenovo Confidential Restricted: PAGE 94 Do not share without consent from Lenovo...
  • Page 95 Level 2 – Service and Repair Manual 13. Place both thumbs on point 1 and slide them around the perimeter of the Battery Inlay to point 2. 04/20/2018 Lenovo Confidential Restricted: PAGE 95 Do not share without consent from Lenovo...

  • Page 96: Safety Certification Label Application

    The Label must be centered on the bottom of the Battery Inlay at the dimensions shown. Slide a fingertip over the Label to secure it to the Battery Inlay. Lenovo Confidential Restricted: PAGE 96 Do not share without consent from Lenovo...

  • Page 97: Sim/Sd Card Tray Assembly

    XT1944 SIM Tray_SS_GL&46369298 CS Place the IMEI Label on the SIM/SD Tray in the location shown. 04/20/2018 Insert the SIM/SD Tray into the SIM/SD Tray opening in the phone. Lenovo Confidential Restricted: PAGE 97 Do not share without consent from Lenovo...
  • Page 98 Lenovo Moto E5 Level 2 – Service and Repair Manual Use a finger to push the Tray into the phone until the Tray snaps into place. 04/20/2018 Lenovo Confidential Restricted: PAGE 98 Do not share without consent from Lenovo...

Table of Contents