Lenovo Moto E5
Level 2 – Service and Repair Manual
3.
Verify the liners on the Battery Inlay and Imager
Deco have been removed, if present.
4.
Beginning at the top corners, apply the Rear
Inlay to the Front Housing. Verify the Imager
Deco Bezel fits through the hole in the Battery
Inlay.
5.
Verify the Inlay is seated in all 4 corners and not
overlapping any of the Front Housing edges.
6.
Apply manual pressure to the Battery Inlay as
follows:
7.
Place both thumbs on point 1 (in the middle of
the Inlay) and slide them out to point 2.
8.
Place both thumbs on point 3 and slide them out
to point 4.
9.
Place both thumbs on point 5 and slide them out
to point 6.
10. Place both thumbs on point 7 and slide them out
to point 8.
11. Place both thumbs on point 9 and slide them out
to point 10.
12. Place both thumbs on point 11 and slide them
out to point 12.
PAGE 94
12
2
10
2
4
04/20/2018
6
8
11
3
9
1
1
3
5
7
Lenovo Confidential Restricted:
Do not share without consent from Lenovo
12
10
2
4
6
8