Page 1 User Manual DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router July 2022...
Page 2: Table Of Contents
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router User Manual Contents Chapter 1. Introduction.........5 Contents and Audience............5 Conventions..............5 Document Structure............5 Chapter 2. Overview..........6 General Information............6 Specifications..............8 Product Appearance............13 Upper Panel..............13 Back Panel...............15 Delivery Package............17 Chapter 3. Installation and Connection......18 Before You Begin............18 Connecting to PC............19...
Page 3 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router User Manual Statistics..............67 Network Statistics............67 DHCP..............68 Routing..............69 Clients and Sessions.............71 Port Statistics............72 Multicast Groups............73 IPsec Statistics............74 VPN Statistics............75 Connections Setup............76 WAN..............76 Creating Dynamic IPv4 or Static IPv4 WAN Connection....78 Creating Dynamic IPv6 or Static IPv6 WAN Connection....81 Creating PPPoE WAN Connection..........84...
Page 4 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router User Manual Advanced..............171 VLAN..............172 WAN Remapping............175 DNS..............176 DDNS..............178 Ports Settings............180 Redirect..............183 Routing..............184 TR-069 Client............186 Port Mirroring............188 UPnP IGD..............190 UDPXY..............192 IGMP..............194 ALG/Passthrough............195 CoovaChilli.............197 Firewall..............201 IP Filter...............201 Virtual Servers............206 DMZ..............210 MAC Filter..............212 URL Filter..............214 AdBlock..............217 Remote Access............218 System..............221...
Page 5: Chapter 1. Introduction
Chapter 2 gives an overview of the router's hardware and software features, describes its appearance and the package contents. Chapter 3 explains how to install the router DIR-X1530 and configure a PC in order to access its web-based interface. Chapter 4 describes all pages of the web-based interface in detail.
Page 6: Chapter 2. Overview
You are able to connect the wireless router DIR-X1530 to a cable or DSL modem or to a private Ethernet line and use a high-speed Internet connection to successfully fulfill a wide range of professional tasks.
Page 7 (the interface is available in two languages – in Russian and in English). The configuration wizard allows you to quickly switch DIR-X1530 to one of the following modes: router (for connection to a wired or wireless ISP), access point, repeater, or client, and then configure all needed setting for operation in the selected mode in several simple steps.
Page 8: Specifications
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Overview User Manual Specifications Hardware Processor · RTL8198D (900MHz) · 256MB, DDR3, built in processor Flash · 128MB, SPI NAND Interfaces · 10/100/1000BASE-T WAN port · 3 10/100/1000BASE-T LAN ports LEDs · Power ·...
Page 9 Bilingual web-based interface configuration management (Russian/English) · Support of D-Link Assistant application for Android and iPhone smartphones · Notification on connection problems and auto redirect to settings · Firmware update via web-based interface · Automatic notification on new firmware version ·...
Page 10 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Overview User Manual Wireless Module Parameters Standards · IEEE 802.11ax · IEEE 802.11ac Wave 2 · IEEE 802.11a/b/g/n · IEEE 802.11w Frequency range · 2400 ~ 2483.5MHz · 5150 ~ 5350MHz The frequency range depends upon the radio frequency regulations applied in your ·...
Page 11 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Overview User Manual Wireless Module Parameters Transmitter output power · 802.11a (typical at room temperature 25 °C) 15dBm at 6, 9, 12, 18, 24, 36, 48, 54Mbps The maximum value of the transmitter ·...
Page 12 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Overview User Manual Wireless Module Parameters · 802.11ac (typical at PER = 10% (1000-byte PDUs) at room temperature 25 °C) VHT20 -93dBm at MCS0 -68dBm at MCS8 VHT40 -90dBm at MCS0 -63dBm at MCS9...
Page 13: Product Appearance
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Overview User Manual Product Appearance Upper Panel Figure 1. Upper panel view. Mode Description The router is being loaded. Solid orange The router is powered on. Solid white Power Blinking (white and The firmware is being updated.
Page 14 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Overview User Manual Mode Description The default WAN connection is on. Solid white The default WAN connection is off, or • Internet Solid orange there are no WAN connections created. • The WAN cable is not connected.
Page 15: Back Panel
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Overview User Manual Back Panel Figure 2. Back panel view. Port Description LAN 1-3 3 Ethernet ports to connect computers or network devices. A port to connect to a cable or DSL modem or to a private Ethernet...
Page 16 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Overview User Manual Port Description A button to restore the factory defaults. RESET To restore the factory defaults, push the button (with the device turned on), hold it for 10 seconds, and then release the button.
Page 17: Delivery Package
• “Quick Installation Guide” (brochure). • The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru). Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.
Page 18: Chapter 3. Installation And Connection
Computer or Mobile Device Configuration of the wireless dual band gigabit router with a built-in 3-port switch DIR-X1530 (hereinafter referred to as “the router”) is performed via the built-in web-based interface. The web- based interface is available from any operating system that supports a web browser.
Page 19: Connecting To Pc
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual Connecting to PC PC with Ethernet Adapter 1. Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC.
Page 20: Obtaining Ip Address Automatically (Os Windows 7)
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual Obtaining IP Address Automatically (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category...
Page 21 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual 3. In the menu located on the left part of the window, select the Change adapter settings line. Figure 4. The Network and Sharing Center window. Page 21 of 254...
Page 22 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed. Figure 5. The Network Connections window. Page 22 of 254...
Page 23 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual 5. In the Local Area Connection Properties window, on the Networking tab, select the Internet Protocol Version 4 (TCP/IPv4) line. Click the Properties button. Figure 6. The Local Area Connection Properties window.
Page 24 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button. Figure 7. The Internet Protocol Version 4 (TCP/IPv4) Properties window.
Page 25: Obtaining Ip Address Automatically (Os Windows 10)
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual Obtaining IP Address Automatically (OS Windows 10) 1. Click the Start button and proceed to the Settings window. 2. Select the Network & Internet section. Figure 8. The Windows Settings window.
Page 26 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual 3. In the Change your network settings section, select the Change adapter options line. Figure 9. The Network & Internet window. Page 26 of 254...
Page 27 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed. Figure 10. The Network Connections window. 5. In the Local Area Connection Properties window, on the Networking tab, select the Internet Protocol Version 4 (TCP/IPv4) line.
Page 28 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button. Figure 12. The Internet Protocol Version 4 (TCP/IPv4) Properties window.
Page 29: Pc With Wi-Fi Adapter
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual PC with Wi-Fi Adapter 1. Connect the power cord to the power connector port on the back panel of the router, then plug the power adapter into an electrical outlet or power strip.
Page 30: Obtaining Ip Address Automatically And Connecting To Wireless Network (Os Windows 7)
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual Obtaining IP Address Automatically and Connecting to Wireless Network (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category...
Page 31 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button. Figure 14. The Internet Protocol Version 4 (TCP/IPv4) Properties window.
Page 32 User Manual 9. In the opened Wireless Network Connection window, select the wireless network DIR- X1530 (for operating in the 2.4GHz band) or DIR-X1530-5G (for operating in the 5GHz band) and click the Connect button. Figure 16. The list of available networks.
Page 33: Obtaining Ip Address Automatically And Connecting To Wireless Network (Os Windows 10)
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual Obtaining IP Address Automatically and Connecting to Wireless Network (OS Windows 10) 1. Click the Start button and proceed to the Settings window. 2. Select the Network & Internet section.
Page 34 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button. Figure 18. The Internet Protocol Version 4 (TCP/IPv4) Properties window.
Page 35 User Manual 9. In the opened Wireless Network Connection window, select the wireless network DIR- X1530 (for operating in the 2.4GHz band) or DIR-X1530-5G (for operating in the 5GHz band) and click the Connect button. Figure 20. The list of available networks.
Page 36: Connecting To Web-Based Interface
(create a WAN connection, change the parameters of the wireless network, specify the settings of the firewall, etc.). For security reasons, DIR-X1530 with default settings cannot connect to the Internet. To get started, please set your own password used to access the web-based interface and, if needed, configure other settings recommended by your ISP.
Page 37 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual If you configured the device previously, after access to the web-based interface the login page opens. Enter the username (admin) in the Username field and the password you specified in the Password field, then click the LOGIN button.
Page 38: Web-Based Interface Structure
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual Web-based Interface Structure Summary Page On the Summary page, detailed information on the device state is displayed. Figure 25. The summary page. Page 38 of 254...
Page 39 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual The Device Information section displays the model and hardware version of the router, the firmware version, and other data. To contact the technical support group (to send an e-mail), left-click the support e-mail address.
Page 40: Home Page
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual Home Page The Home page displays links to the most frequently used pages with device's settings. Figure 26. The Home page. Other settings of the router are available in the menu in the left part of the page.
Page 41: Menu Sections
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual Menu Sections To configure the router use the menu in the left part of the page. In the Initial Configuration section you can run the Initial Configuration Wizard. The Wizard...
Page 42: Notifications
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Installation and Connection User Manual Notifications The router's web-based interface displays notifications in the top right part of the page. Figure 27. The web-based interface notifications. Click the icon displaying the number of notifications to view the complete list and click the relevant button.
Page 43: Chapter 4. Configuring Via Web-Based Interface
If you perform initial configuration of the router via Wi-Fi connection, please make sure that you are connected to the wireless network DIR-X1530 (for operating in the 2.4GHz band) or DIR- X1530-5G (for operating in the 5GHz band) and click the NEXT button.
Page 44 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual On the opened page, click YES in order to leave the current language of the web-based interface or click NO to select the other language. Figure 31. Selecting a language.
Page 45: Selecting Operation Mode
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Selecting Operation Mode Select the needed operation mode and click the NEXT button. Router In order to connect your device to a wired ISP, on the Device mode page, from the Connection method list, select the Wired connection value.
Page 46: Access Point Or Repeater
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Access Point or Repeater In order to connect your device to a wired router for adding a wireless network to the existing local network, on the Device mode page, from the Connection method list, select the Wired connection value.
Page 47 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual In order to let wired PCs connected to your device access the network of a wireless router, on the Device mode page, from the Connection method list, select the Wi-Fi value. Then from the Work mode list select the Client value.
Page 48: Changing Lan Ipv4 Address
If you want to manually assign the LAN IPv4 address for DIR-X1530, do not select the Automatic obtainment of IPv4 address checkbox and fill in the IP address, Subnet mask, DNS IP address, Hostname fields and, if needed, the Gateway IP address field.
Page 49: Wi-Fi Client
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Wi-Fi Client This configuration step is available for the WISP Repeater, Repeater, and Client modes. 1. On the Wi-Fi Сlient page, click the WIRELESS NETWORKS button and select the network to which you want to connect in the opened window.
Page 50 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description The number of the key (from first to fourth) which will be used for Default key ID WEP encryption. Encryption key WEP as Select the checkbox to set a hexadecimal number as a key for encryption.
Page 51: Configuring Wan Connection
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Configuring WAN Connection This configuration step is available for the Router and WISP Repeater modes. You should configure your WAN connection in accordance with data provided by your Internet service provider (ISP).
Page 52: Static Ipv4 Connection
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Static IPv4 Connection Figure 40. The page for configuring Static IPv4 WAN connection. Fill in the following fields: IP address, Subnet mask, Gateway IP address, and DNS IP address.
Page 53: Static Ipv6 Connection
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Static IPv6 Connection Figure 41. The page for configuring Static IPv6 WAN connection. Fill in the following fields: IP address, Prefix, Gateway IP address, and DNS IP address.
Page 54: Pppoe, Ipv6 Pppoe, Pppoe Dual Stack, Pppoe + Dynamic Ip (Pppoe Dual Access) Connections
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual PPPoE, IPv6 PPPoE, PPPoE Dual Stack, PPPoE + Dynamic IP (PPPoE Dual Access) Connections Figure 42. The page for configuring PPPoE WAN connection. In the Username field enter the login and in the Password field enter the password provided Click the Show icon ( your ISP.
Page 55: Pppoe + Static Ip (Pppoe Dual Access) Connection
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual PPPoE + Static IP (PPPoE Dual Access) Connection Figure 43. The page for configuring PPPoE + Static IP (PPPoE Dual Access) WAN connection. In the Username field enter the login and in the Password field enter the password provided your ISP.
Page 56: Pptp + Dynamic Ip Or L2Tp + Dynamic Ip Connection
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual PPTP + Dynamic IP or L2TP + Dynamic IP Connection Figure 44. The page for configuring PPTP + Dynamic IP WAN connection. In the Username field enter the login and in the Password field enter the password provided by your ISP.
Page 57: Pptp + Static Ip Or L2Tp + Static Ip Connection
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual PPTP + Static IP or L2TP + Static IP Connection Figure 45. The page for configuring PPTP + Static IP WAN connection. In the Username field enter the login and in the Password field enter the password provided by Click the Show icon ( your ISP.
Page 58: Configuring Wireless Network
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Configuring Wireless Network This configuration step is available for the Router, Access point, WISP Repeater, and Repeater modes. 1. On the Wireless Network 2.4 GHz page, in the Network name field, specify your own name for the wireless network in the 2.4GHz band or leave the value suggested by the...
Page 59 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual 5. If you want to create an additional wireless network isolated from your LAN in the 2.4GHz band, select the Enable guest network checkbox (available for the Router and WISP Repeater modes only).
Page 60: Configuring Lan Ports For Iptv/Voip
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Configuring LAN Ports for IPTV/VoIP This configuration step is available for the Router mode. On the IPTV page, select the Is an STB connected to the device checkbox.
Page 61 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual On the VoIP page, select the Is an IP phone connected to the device checkbox. Figure 49. The page for selecting a LAN port to connect an VoIP phone.
Page 62: Changing Web-Based Interface Password
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Changing Web-based Interface Password On this page, you should change the default administrator password. To do this, enter a new password in the User’s interface password and Password confirmation fields. You may set any password except admin.
Page 63 If problems of connection have not been solved, contact the technical support of your ISP (as a rule, the technical support phone is provided with the agreement) or the D-Link technical support (the phone number will be displayed on the page after several attempts of checking the connection).
Page 64: Connection Of Multimedia Devices
The Multimedia Devices Connection Wizard helps to configure LAN ports or available wireless interfaces of the router for connecting additional devices, for example, an IPTV set-top box or IP phone. Contact your ISP to clarify if you need to configure DIR-X1530 in order to use these devices.
Page 65 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual If you need to configure a connection via VLAN, click the ADVANCED MODE button. Figure 53. The Multimedia Devices Connection Wizard. The advanced mode. In the WAN section, click the Add icon Figure 54.
Page 66 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual The selected port or wireless interface cannot use the default connection to access the Internet. To deselect the port or wireless interface in the simplified mode, left-click the selected element (the frame will disappear) and click the APPLY button.
Page 67: Statistics
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Statistics The pages of this section display data on the current state of the router: network statistics • IP addresses leased by the DHCP server • the routing rules and routing tables •...
Page 68: Dhcp
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual DHCP The Statistics / DHCP page displays the information on computers that have been identified by hostnames and MAC addresses and have got IP addresses from the DHCP server of the device.
Page 69: Routing
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Routing The Statistics / Routing page displays the routing rules and routing tables. Figure 57. The Statistics / Routing page. The Rules section displays routing rules, their corresponding routing tables, incoming and outgoing interfaces, priority levels, and other data.
Page 70 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 58. The routing table page. The opened page displays the information on routes in the selected routing table. The table contains destination IP addresses, gateways, subnet masks, and other data.
Page 71: Clients And Sessions
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Clients and Sessions On the Statistics / Clients and Sessions page, you can view the list of devices connected to the local network of the router and information on current sessions of each device.
Page 72: Port Statistics
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Port Statistics On the Statistics / Port Statistics page, you can view statistics for traffic passing through ports of the router. The information shown on the page can be used for diagnosing connection problems.
Page 73: Multicast Groups
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Multicast Groups The Statistics / Multicast Groups page displays addresses of active multicast groups (including IPTV channels and groups for transferring service information) to which the device is subscribed, and the interface through which the device is subscribed.
Page 74: Ipsec Statistics
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual IPsec Statistics On the Statistics / IPsec Statistics page, you can view statistics for IPsec tunnels of the router. For each tunnel the following data are displayed: name and state (when the connection is on, its...
Page 75: Vpn Statistics
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual VPN Statistics On the Statistics / VPN Statistics page, you can view the list of clients connected to the PPTP or L2TP server of the router. Figure 63. The Statistics / VPN Statistics page.
Page 76: Connections Setup
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Connections Setup In this menu you can configure basic parameters of the router's local area network and configure connection to the Internet (a WAN connection). On the Connections Setup / WAN page, you can create and edit connections used by the router.
Page 77 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 65. The Connections Setup / WAN page. The advanced mode. To create a new connection, click the ADD button ( ) in the Connections List section. Upon that the connection creation page opens.
Page 78: Creating Dynamic Ipv4 Or Static Ipv4 Wan Connection
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Creating Dynamic IPv4 or Static IPv4 WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 79 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 67. The page for creating a new Static IPv4 connection. The Ethernet section. Parameter Description Ethernet A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding. In the field, enter the MAC address registered by your ISP upon concluding the agreement.
Page 80 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 68. The page for creating a new Static IPv4 connection. The IPv4 section. Parameter Description IPv4 For Static IPv4 type IP address Enter an IP address for this WAN connection.
Page 81: Creating Dynamic Ipv6 Or Static Ipv6 Wan Connection
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Creating Dynamic IPv6 or Static IPv6 WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 82 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 70. The page for creating a new Static IPv6 connection. The Ethernet section. Parameter Description Ethernet A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding. In the field, enter the MAC address registered by your ISP upon concluding the agreement.
Page 83 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description IPv6 For Static IPv6 type IPv6 address Enter an IPv6 address for this WAN connection. Prefix The length of the subnet prefix. The value 64 is used usually.
Page 84: Creating Pppoe Wan Connection
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Creating PPPoE WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 85 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 73. The page for creating a new PPPoE connection. The Ethernet section. Parameter Description Ethernet A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding. In the field, enter the MAC address registered by your ISP upon concluding the agreement.
Page 86 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 74. The page for creating a new PPPoE connection. The PPP section. Parameter Description Move the switch to the right if you don't need to enter a username Without authorization and password to access the Internet.
Page 87 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description Select a method of MPPE encryption. No encryption: MPPE encryption is not applied. • MPPE 40 128 bit: MPPE encryption with a 40-bit or 128-bit •...
Page 88 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 75. The page for creating a new PPPoE connection. The IPv4 section. Parameter Description Move the switch to the right to configure automatic assignment of Obtain DNS server addresses DNS server addresses.
Page 89: Creating Pptp, L2Tp, Or L2Tp Over Ipsec Wan Connection
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Creating PPTP, L2TP, or L2TP over IPsec WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 90 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 77. The page for creating a new PPTP connection. The PPP section. Parameter Description Move the switch to the right if you don't need to enter a username Without authorization and password to access the Internet.
Page 91 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description Select a method of MPPE encryption. No encryption: MPPE encryption is not applied. • MPPE 40 128 bit: MPPE encryption with a 40-bit or 128- •...
Page 92 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 78. The page for creating a new PPTP connection. The IPv4 section. Parameter Description Move the switch to the right to configure automatic assignment of Obtain DNS server addresses DNS server addresses.
Page 93 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual After clicking the button, the window for additional configuration of the connection opens. If you want to use this WAN connection to access the Internet, select the to the Internet choice of the radio button.
Page 94: Creating Pppoe Ipv6 Or Pppoe Dual Stack Wan Connection
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Creating PPPoE IPv6 or PPPoE Dual Stack WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 95 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 81. The page for creating a new PPPoE IPv6 connection. The Ethernet section. Parameter Description Ethernet A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding. In the field, enter the MAC address registered by your ISP upon concluding the agreement.
Page 96 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 82. The page for creating a new PPPoE IPv6 connection. The PPP section. Parameter Description Move the switch to the right if you don't need to enter a username Without authorization and password to access the Internet.
Page 97 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description Select a method of MPPE encryption. No encryption: MPPE encryption is not applied. • MPPE 40 128 bit: MPPE encryption with a 40-bit or 128-bit •...
Page 98 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 83. The page for creating a new PPPoE Dual Stack connection. The IPv4 section. Parameter Description IPv4 (for the PPPoE Dual Stack type) Obtain DNS server Move the switch to the right to configure automatic assignment of addresses DNS server addresses.
Page 99 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description Primary IPv6 DNS Enter addresses of the primary and secondary IPv6 DNS servers in server / Secondary the relevant fields. IPv6 DNS server When all needed settings are configured, click the APPLY button.
Page 100: Creating Ipip6 Wan Connection
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Creating IPIP6 WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 101 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 86. The page for creating a new IPIP6 connection. The IP section. Parameter Description Obtain remote host Move the switch to the right to configure automatic assignment of a address automatically remote host IPv6 address.
Page 102 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual If you want to use this WAN connection to access the Internet, select the to the Internet choice of the radio button. Then select an existing connection which will be used to access the VPN server or select the create a new connection choice of the radio button and click the CONTINUE button.
Page 103: Creating 6In4 Wan Connection
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Creating 6in4 WAN Connection Before configuring the connection, please first register on a tunnel broker’s web site. On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 104 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right to set the maximum size of units transmitted by the interface automatically. Set MTU automatically Move the switch to the left to specify this parameter manually.
Page 105: Creating 6To4 Wan Connection
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Creating 6to4 WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 106: Creating 6Rd Wan Connection
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Creating 6rd WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 107 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description The number of bits in the IPv4 address of the router in the 6rd IPv4 mask length domain. Move the switch to the right to exchange traffic between clients through the main host of the network in the 6rd domain.
Page 108: Lan
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual To configure the router's local interface, go to the Connections Setup / LAN page. IPv4 Go to the IPv4 tab to change the IPv4 address of the router, configure the built-in DHCP server, specify MAC address and IPv4 address pairs, or add own DNS records.
Page 109 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description The name of the device assigned to its IPv4 address in the local Hostname subnet. Figure 91. Configuring the local interface. The IPv4 tab. The Dynamic IP Addresses section.
Page 110 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description The start IP address of the address range used by the DHCP server to Start IP distribute IP addresses to clients. The end IP address of the address range used by the DHCP server to End IP distribute IP addresses to clients.
Page 111 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual In the DHCP Options section, you can change default values for some options of DHCP protocol (IP address, subnet mask, DNS servers) or specify additional parameters which the built-in DHCP server should send to clients to configure the local network.
Page 112 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual In the Static IP Addresses section, you can specify MAC address and IPv4 address pairs (set a fixed IPv4 address in the local area network for a device with a certain MAC address). The router...
Page 113 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual In the Name field, specify the domain or domain name to which the specified IPv4 address will correspond. In the IP address field, specify a host from the internal or external network. You can choose a device connected to the router's LAN at the moment.
Page 114: Ipv6
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual IPv6 Go to the IPv6 tab to change or add the IPv6 address of the router, configure IPv6 addresses assignment settings, specify MAC address and IPv6 address pairs, or add own DNS records.
Page 115 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual In the Dynamic IP Addresses section, you can configure IPv6 addresses assignment settings. Figure 97. Configuring the local interface. The IPv6 tab. The Dynamic IP Addresses section. Parameter...
Page 116 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description Use the button to set one of the available IP address ranges. In the SELECT ADDRESS window displayed, select the needed range and click the SAVE RANGE button to automatically fill in the Start IP and End IP fields.
Page 117 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 99. Configuring the local interface. The IPv6 tab. The window for adding a DNS record. In the IP address field, specify a host from the internal or external network. You can choose a device connected to the router's LAN at the moment.
Page 118: Wan Failover
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual WAN Failover On the Connections Setup / WAN Failover page, you can enable the WAN backup function, which provides you with uninterrupted access to the Internet. When your main connection breaks down, the router activates the backup connection;...
Page 119 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual In the Connections IPv4 section, the existing IPv4 connections are displayed in order of their priority. The first connection on the list serves as the main connection, the others are backup connections.
Page 120 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual In the Check with ping section, specify settings of checking the connection using ICMP ping mechanism. Parameter Description Check with ping A time period (in seconds) between regular checks of the hosts’...
Page 121: Vpn
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual In this menu you can configure VPN connections based on IPsec/GRE/EoGRE/EoIP/IPIP protocols and create a PPTP or L2TP server and accounts for access to it. IPsec On the VPN / IPsec page, you can configure VPN tunnels based on IPsec protocol.
Page 122 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual To create a new tunnel, click the ADD button ( ) in the Tunnels section. Setting for both devices which establish the tunnel should be the same. Figure 103. The page for adding an IPsec tunnel. The General Settings section.
Page 123 The field is available for editing if the Dynamic IPsec switch is moved to the left. A remote host identifier to establish connection over IPsec with particular hosts only. To establish connection, DIR-X1530 remote Remote identifier identifier value should correspond to the local identifier value specified in the settings of the remote host.
Page 124 • the default WAN connection. A local identifier of the router to establish connection over IPsec with particular hosts only. To establish connection, DIR-X1530 local Local identifier identifier value should correspond to the remote identifier value specified in the settings of the remote host. Use an IP address, domain name, or certificate CN.
Page 125 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right to enable using DPD protocol for this tunnel. Such a setting allows to check the status of the remote host: if...
Page 126 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 104. The page for adding an IPsec tunnel. The First Phase / The Second Phase sections. Parameter Description The First Phase First phase Select an available encryption algorithm from the drop-down list.
Page 127 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description IKE (Internet Key Exchange) is a protocol of keys exchange between two hosts of VPN connections. Select a version of the protocol from IKE version the drop-down list.
Page 128 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 105. The page for adding an IPsec tunnel. The window for adding a tunneled network. In the opened window, you can specify the following parameters: Parameter Description A local subnet IP address and mask.
Page 129 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Click the SAVE button. To edit fields in the Tunneled Networks section, select the relevant line in the table. In the opened window, change the needed parameters and click the SAVE button.
Page 130: Gre
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual On the VPN / GRE page, you can configure VPN tunnels based on GRE protocol. GRE (Generic Routing Encapsulation) is a protocol for tunneling network packets, which enables you to create unprotected VPN tunnels.
Page 131 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual You can specify the following parameters: Parameter Description Tunnel settings Move the switch to the right to enable the GRE tunnel. Enable Move the switch to the left to disable the GRE tunnel.
Page 132: Ipip
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual IPIP On the VPN / IPIP page, you can configure VPN tunnels based on IPIP protocol. IPIP (IP Encapsulation within IP) is a protocol for IP-tunneling network packets, which enables you to create unprotected VPN tunnels, encapsulating IP packets within other IP packets.
Page 133 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual You can specify the following parameters: Parameter Description Tunnel settings Move the switch to the right to enable the IPIP tunnel. Enable Move the switch to the left to disable the IPIP tunnel.
Page 134: Pptp/L2Tp Servers
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual PPTP/L2TP Servers On the VPN / PPTP/L2TP Servers page, you can enable the PPTP or L2TP VPN server. To configure the PPTP or L2TP server, go to the relevant tab.
Page 135 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual You can specify the following parameters: Parameter Description VPN network Server local IP address The IP address of the VPN server. Start client IP The start IP address of the address range for VPN server’s clients.
Page 136 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description Authentication Move the switch to the right to enable authentication. Upon that the Enable authentication Multiple sessions, CHAP, MSCHAP, MSCHAPv2, and PAP lists are displayed on the page.
Page 137 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description Advanced Settings Available on the PPTP tab. Maximum number of The maximum number of devices allowed to connect to the PPTP connections server. Available on the L2TP tab.
Page 138 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description User Select a user account to allow access. The mode of IP address assignment. Select a value from the drop- down list.
Page 139: Vpn Users
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual VPN Users On the VPN / VPN Users page, you can create user accounts to provide authorized access to a PPTP or L2TP server. Figure 112. The VPN / VPN Users page.
Page 140: Eogre
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual EoGRE On the VPN / EoGRE page, you can configure VPN tunnels based on EoGRE technology. EoGRE (Ethernet over GRE) technology allows transferring traffic through VPN tunnels in heterogeneous networks, encapsulating Ethernet frames with the help of GRE protocol and transferring them over a network which uses a network protocol of another level.
Page 141 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual You can specify the following parameters: Parameter Description Move the switch to the right to enable the EoGRE tunnel. Enable Move the switch to the left to disable the EoGRE tunnel.
Page 142: Eoip
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual EoIP On the VPN / EoIP page, you can configure VPN tunnels based on EoIP technology. EoIP (Ethernet over IP) technology allows creating an Ethernet tunnel between two routers via connections which can transmit IP packets (e.g., IPIP, PPTP connections).
Page 143 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual You can specify the following parameters: Parameter Description Move the switch to the right to enable the EoIP tunnel. Enable Move the switch to the left to disable the EoIP tunnel.
Page 144 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual To edit the parameters of an existing tunnel, in the Tunnels section, select the relevant tunnel in the table. On the opened page, change the needed parameters and click the APPLY button.
Page 145: Wi-Fi
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Wi-Fi In this menu you can specify all needed settings for your wireless network. Basic Settings In the Wi-Fi / Basic Settings section, you can change basic parameters for the wireless interface of the router and configure the basic and additional wireless networks.
Page 146 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual In the Basic Settings section, the following parameters are available: Parameter Description To enable Wi-Fi connection, move the switch to the right. To disable Wi-Fi connection, move the switch to the left.
Page 147 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right to let the router search for a free Enable periodic channel in certain periods of time. When the switch is moved to the scanning right, the Scanning period field is available for editing.
Page 148 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description If the switch is moved to the right, other users cannot see your Wi-Fi Hide SSID network. It is recommended not to hide the network in order to simplify initial configuration of the wireless network.
Page 149 Parameter Description If the wireless network broadcasting is disabled, devices cannot connect to the wireless network. Upon that DIR-X1530 can connect to another access point as a wireless client. To enable/disable broadcasting on a schedule, click the Set schedule icon ( ).
Page 150 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual In the Security Settings section, you can change security settings of the wireless network. By default, the WPA2-PSK network authentication type of both bands of the wireless network is specified.
Page 151 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Authentication type Description A mixed type of authentication. When this value is selected, devices WPA2-PSK/WPA3-SAE using the WPA2-PSK authentication type and devices using the mixed WPA3-SAE authentication type can connect to the wireless network.
Page 152 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description For Open authentication type only. To activate WEP encryption, move the switch to the right. Upon that Enable encryption WEP the Default key ID drop-down list, the Encryption key WEP as HEX switch, and four Encryption key fields are displayed on the page.
Page 153 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description An encryption method: TKIP, AES, or TKIP+AES. TKIP and TKIP+AES encryption types are not available for Encryption type WPA3-SAE and WPA2-PSK/WPA3-SAE mixed authentication types. The time period (in seconds), at the end of which a new key for WPA Group key update encryption is generated.
Page 154 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual When the WPA, WPA2, or WPA/WPA2 mixed value is selected, the following settings are displayed on the page: Figure 123. The WPA2 value is selected from the Network authentication drop-down list.
Page 155 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description For WPA2 authentication type only. Protected Management Frames help to improve packet privacy protection for wireless data transmission. Select a value for the wireless network from the drop-down list.
Page 156: Client Management
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Client Management On the Wi-Fi / Client Management page, you can view the list of wireless clients connected to the router. Figure 124. The page for managing the wireless clients.
Page 157: Wps
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual On the Wi-Fi / WPS page, you can enable the function for configuration of the WLAN and select a method for connection to the WLAN. The WPS function helps to configure the protected wireless network automatically. Devices connecting to the wireless network via the WPS function must support the WPS function.
Page 158 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual To activate the WPS function via the web-based interface, on the tab of the relevant band, click the ENABLE WPS button. When the WPS function is enabled, the Information section is available on the page.
Page 159: Using Wps Function Via Web-Based Interface
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Using WPS Function via Web-based Interface To connect to the basic wireless network via the PIN method of the WPS function, follow the next steps: 1. Click the ENABLE WPS button.
Page 160: Using Wps Function Without Web-Based Interface
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Using WPS Function without Web-based Interface You can use the WPS function without accessing the web-based interface of the router. To do this, you need to configure the following router's settings: 1.
Page 161: Client
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Client On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access point or to a WISP. To configure the 2.4GHz band or 5GHz band, go to the relevant tab.
Page 162 When you have configured the parameters, click the APPLY button. When connecting to a wireless access point, the wireless channel of DIR-X1530 will switch to the channel of the access point to which you have connected. Page 162 of 254...
Page 163 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual In addition, the Connection Information section in which you can view the connection status and the network basic parameters is displayed. If you want to connect to the WISP network, after configuring the device as a client, you need to create a WAN connection with relevant parameters for the WiFiClient_2GHz interface in the 2.4GHz band or for the WiFiClient_5GHz interface in the 5GHz band.
Page 164: Additional
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Additional On page of the Wi-Fi / Additional section, you can define additional parameters for the WLAN of the router. To configure the 2.4GHz band or 5GHz band, go to the relevant tab.
Page 165 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual The following fields are available on the page: Parameter Description The channel bandwidth for 802.11n standard in the 2.4GHz band (the 2.4 GHz tab). 20 MHz: 802.11n clients operate at 20MHz channels.
Page 166 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description Available on the 5 GHz tab. TX Beamforming is the signal processing/directing technique which Enable TX helps to support a high enough transfer rate in the areas with difficult Beamforming conditions for the signal propagation.
Page 167 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description Guard interval (in nanoseconds). This parameter defines the interval between symbols transmitted when the router is communicating to wireless devices. Enable: The router uses the 400 ns short guard interval.
Page 168: Mac Filter
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual MAC Filter On the Wi-Fi / MAC Filter page, you can define a set of MAC addresses of devices which will be allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to access the WLAN.
Page 169 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 129. The window for adding a rule for the MAC filter. You can specify the following parameters: Parameter Description Frequency band From the drop-down list, select a band of the wireless network.
Page 170 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual After creating the rules you need to configure the filtering modes. To open the basic or additional wireless network for the devices which MAC addresses are specified on this page and to close the wireless network for all other devices, in the section corresponding to the band (2.4 GHz or 5 GHz), left-click the line of the wireless network.
Page 171: Advanced
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Advanced In this menu you can configure advanced settings of the router: create or edit VLANs • use any LAN port of the router as WAN port •...
Page 172: Vlan
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual VLAN On the Advanced / VLAN page, you can edit existing and create new virtual networks (VLAN), e.g., for distinguishing traffic or specifying additional WAN interfaces. By default, 2 VLANs are created in the router's system.
Page 173 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual To create a new VLAN, click the ADD button ( Figure 131. The page for adding a VLAN. You can specify the following parameters: Parameter Description Name A name for the VLAN for easier identification.
Page 174 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description Select a type for each port included in the VLAN. Untagged: Untagged traffic will be transmitted through the • specified port. Tagged: Tagged traffic will be transmitted through the •...
Page 175: Wan Remapping
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual WAN Remapping On the Advanced / WAN Remapping page, you can use any LAN port the router to connect to a private Ethernet line. Figure 132. The Advanced / WAN Remapping page.
Page 176: Dns
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual On the Advanced / DNS page, you can add DNS servers to the system. Figure 133. The Advanced / DNS page. DNS servers are used to determine the IP address from the name of a server in Intranets or the Internet (as a rule, they are specified by an ISP or assigned by a network administrator).
Page 177 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual You can specify the addresses of DNS servers manually on this page or configure the router to obtain DNS servers addresses automatically from your ISP upon installing a connection. Also here you can specify addresses of reserve DNS servers which the router can use if the addresses specified manually or obtained automatically are unavailable.
Page 178: Ddns
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual DDNS On the Advanced / DDNS page, you can define parameters of the DDNS service, which allows associating a domain name with dynamic IP addresses. Figure 134. The Advanced / DDNS page.
Page 179 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual On the opened page, you can specify the following parameters: Parameter Description Move the switch to the right to enable DDNS. Enable Move the switch to the left to disable DDNS.
Page 180: Ports Settings
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Ports Settings On the Advanced / Ports Settings page, you can configure or disable autonegotiation of speed and duplex mode or manually configure speed and duplex mode for each Ethernet port of the router.
Page 181 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 137. The window for changing the settings of the router's port. In the opened window, specify the needed parameters: Parameter Description Auto Select the value to enable autonegotiation.
Page 182 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description Autonegotiation Modes To enable the needed data transfer modes, move relevant switches to the right. Flow control Move the switch to the right to enable the flow control function for the port.
Page 183: Redirect
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Redirect On the Advanced / Redirect page, you can enable notifications on the reason of the Internet connection failure. Notifications will be displayed in the browser window when a user is attempting to open a web site on the Internet.
Page 184: Routing
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Routing On the Advanced / Routing page, you can specify static (fixed) routes. Figure 139. The Advanced / Routing page. To specify a new route, click the ADD button ( Figure 140.
Page 185 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description Move the switch to the right to enable the route. Enable Move the switch to the left to disable the route.
Page 186: Tr-069 Client
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual TR-069 Client On the Advanced / TR-069 Client page, you can configure the router for communication with a remote Auto Configuration Server (ACS). The TR-069 client is used for remote monitoring and management of the device.
Page 187 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description Inform Settings Move the switch to the right so the router may send reports (data on the device and network statistics) to the ACS. Interval Specify the time period (in seconds) between sending reports.
Page 188: Port Mirroring
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Port Mirroring On the Advanced / Port Mirroring page, you can enable the function of mirroring the router’s ports. This function allows to copy traffic from one or several ports to the destination port to monitor network issues with the help of traffic analysis software.
Page 189 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description Select the mode for each port traffic from which should be copied to the destination port: Both: Copy incoming and outgoing traffic from the source •...
Page 190: Upnp Igd
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual UPnP IGD On the Advanced / UPnP IGD page, you can enable the UPnP function. The UPnP function allows to automatically create port forwarding rules for applications in the router’s LAN requiring a connection from an external network.
Page 191 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description For IPv6 IGD only. Pinhole ID An identifier of the rule created for an incoming connection to the router. If you want to disable the UPnP function, move the Enable switch to the left.
Page 192: Udpxy
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual UDPXY On the Advanced / UDPXY page, you can allow the router to use the built-in UDPXY application. The UDPXY application transforms UDP traffic into HTTP traffic. This application allows devices which cannot receive UDP streams to access stream video.
Page 193 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual To access the status page of the application, click the Status link. Figure 145. The UDPXY application status page. Page 193 of 254...
Page 194: Igmp
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual IGMP On the Advanced / IGMP page, you can allow the router to use IGMP and specify needed settings. IGMP is used for managing multicast traffic (transferring data to a group of destinations). This protocol allows using network resources for some applications, e.g., for streaming video, more...
Page 195: Alg/Passthrough
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual ALG/Passthrough On the Advanced / ALG/Passthrough page, you can allow the router to use RTSP, enable the SIP ALG and PPPoE/PPTP/L2TP/IPsec pass through functions. SIP is used for creating, modifying, and terminating communication sessions. This protocol allows telephone calls via the Internet.
Page 196 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right to enable the PPPoE pass through PPPoE pass through function. Move the switch to the right to enable the IPsec pass through IPsec pass through function.
Page 197: Coovachilli
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual CoovaChilli The CoovaChilli service provides authorized Internet access for clients in your corporate or public network. On the Advanced / CoovaChilli page, you can add an authorization server.
Page 198 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual In the Main Settings section, you can specify the following parameters: Parameter Description From the drop-down list, select a physical or virtual interface to be used for the authorization server. In order to specify an additional...
Page 199 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description The password which the router uses for communication with the RADIUS encryption key RADIUS server (the value of this parameter is specified in the RADIUS server settings).
Page 200 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 152. The page for adding an authorization server. The UAM section. In the UAM section, you can specify the following parameters: Parameter Description Move the switch to the right to enable CHAP authentication.
Page 201: Firewall
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Firewall In this menu you can configure the firewall of the router: add rules for IP filtering • create virtual servers • define a DMZ • configure the MAC filter •...
Page 202 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 154. The page for adding a rule for IP filtering. You can specify the following parameters: Parameter Description General Settings Move the switch to the right to enable the rule.
Page 203 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description Select an action for the rule. Allow: Allows packet transmission in accordance with the • Action criteria specified by the rule. Deny: Denies packet transmission in accordance with the •...
Page 204 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description LAN: The rule will be applied to the packets transmitted to • the local network. GRE: The rule will be applied to the packets transmitted to •...
Page 205 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description The destination host start IPv4 or IPv6 address. If it is necessary to specify a single address, leave the End IPv4 Start IPv4 address / address / End IPv6 address field blank.
Page 206: Virtual Servers
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Virtual Servers On the Firewall / Virtual Servers page, you can create virtual servers for redirecting incoming Internet traffic to a specified IP address in the local area network.
Page 207 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Figure 156. The page for adding a virtual server. You can specify the following parameters: Parameter Description General Settings Move the switch to the right to enable the server.
Page 208 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description A name for the virtual server for easier identification. You can Name specify any name. Select a virtual server template from the drop-down list, or select...
Page 209 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual To enable the virtual server at the time specified in the schedule and disable it at the other time, select the Enable rule value from the Action drop-down list and click the SAVE button.
Page 210: Dmz
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual A DMZ is a host or network segment located “between” internal (local) and external (global) networks. In the router, the DMZ implements the capability to transfer a request coming to a port of the router from the external network to a specified host of the internal network.
Page 211 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual To set a schedule for the DMZ, click the Set schedule icon ( ). In the opened window, from the Rule drop-down list, select the Create rule value to create a new schedule...
Page 212: Mac Filter
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual MAC Filter On the Firewall / MAC Filter page, you can configure MAC-address-based filtering for computers of the router's LAN. Figure 158. The Firewall / MAC Filter page.
Page 213 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description Move the switch to the right to enable the rule. Enable rule Move the switch to the left to disable the rule.
Page 214: Url Filter
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual URL Filter On the Firewall / URL Filter page, you can specify restrictions on access to certain web sites and define devices to which the specified restrictions will be applied.
Page 215 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual To specify URL addresses to which the selected filtering mode will be applied, in the Addresses section, click the ADD button ( ). In the opened window, you can specify the following...
Page 216 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual To set a schedule for the URL filter, click the Set schedule icon ( ). In the opened window, from the Rule drop-down list, select the Create rule value to create a new schedule (see the Schedule section, page 228) or select the Select an existing one value to use the existing one.
Page 217: Adblock
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual AdBlock On the Firewall / AdBlock page, you can enable the function of blocking advertisements which appear during web surfing. Figure 161. The Firewall / AdBlock page. To enable the advertisements blocking function, in the Common Settings section, move the Enable switch to the right.
Page 218: Remote Access
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Remote Access On the Firewall / Remote Access page, you can configure access to the web-based interface of the router. By default, the access from external networks to the router is closed. If you need to allow access to the router from the external network, create relevant rules.
Page 219 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description Move the switch to the right to enable the rule. Enable Move the switch to the left to disable the rule.
Page 220 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual To edit a rule for remote access, left-click the relevant rule. In the opened window, change the needed parameters and click the SAVE button. To change or delete the schedule for a rule, click the Edit schedule icon ( ) in the line corresponding to this rule.
Page 221: System
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual System In this menu you can do the following: change the password used to access the router's settings • restore the factory default settings • create a backup of the router's configuration •...
Page 222: Configuration
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Configuration On the System / Configuration page, you can change the password for the administrator account used to access the web-based interface of the router and to access the device settings via TELNET...
Page 223 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual The following buttons are also available on the page: Control Description Click the button to restore the factory default settings. Also you can Factory restore the factory defaults via the hardware RESET button (see the Back Panel section, page 15).
Page 224: Firmware Update
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Firmware Update On the System / Firmware Update page, you can update the firmware of the router and configure the automatic check for updates of the router's firmware.
Page 225 Configuring via Web-based Interface User Manual By default, in the Remote server URL field, the D-Link update server address (fwupdate.dlink.ru) is specified. To add one more address, click the ADD button and enter the address in the displayed line. To remove the address, click the Delete icon ( ) in the line of the address.
Page 226: Local Update
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Local Update Attention! Do not turn off the router before the firmware update is completed. This may cause the device breakdown. To update the firmware of the router locally, follow the next steps: 1.
Page 227: Remote Update
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Remote Update Attention! Do not turn off the router before the firmware update is completed. This may cause the device breakdown. To update the firmware of the router remotely, follow the next steps: 1.
Page 228: Schedule
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Schedule On the System / Schedule page, you can enable/disable Wi-Fi connection and the Wi-Fi filter, configure automatic reboot of the device on a schedule, and set a schedule for different rules and settings of the firewall.
Page 229 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual In the opened window, in the System Time field, the system time of the device is displayed. You can select the Simplified mode value from the Mode drop-down list and specify the following...
Page 230 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual To set a schedule for a task which will be applied to a rule or setting of the firewall or will enable/disable Wi-Fi connection or Wi-Fi filter, click the ADD button ( ) in the All Tasks section.
Page 231 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description Specify the time period for performing a task. Every minute. • Every hour: When this value is selected, the Time field is • displayed in the section.
Page 232: Log
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual On the System / Log page, you can set the system log options and configure sending the system log to a remote host. Figure 169. The System / Log page. The Settings tab.
Page 233 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description The IP or URL address of the host from the local or global network, Server to which the system log will be sent. A port of the host specified in the Server field. By default, the value Port 514 is specified.
Page 234: Ping
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Ping On the System / Ping page, you can check availability of a host from the local or global network via the Ping utility. The Ping utility sends echo requests to a specified host and receives echo replies.
Page 235 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual To specify additional settings, click the MORE SETTINGS button. Figure 172. The System / Ping page. The additional settings window. In the opened window, in the Packet size field, specify the volume of data sent in a request. In the Waiting for response field, specify the response waiting period in seconds.
Page 236: Traceroute
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Traceroute On the System / Traceroute page, you can determine the route of data transfer to a host via the traceroute utility. Figure 173. The System / Traceroute page.
Page 237 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual To specify additional settings, click the MORE SETTINGS button. Figure 174. The System / Traceroute page. The additional settings window. In the opened window, you can specify the following parameters:...
Page 238: Telnet/Ssh
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Telnet/SSH On the System / Telnet/SSH page, you can enable or disable access to the device settings via TELNET and/or SSH from your LAN. By default, access is disabled.
Page 239: System Time
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual System Time On the System / System Time page, you can manually set the time and date of the router or configure automatic synchronization of the system time with a time server on the Internet.
Page 240 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual 3. Select your time zone from the Time zone drop-down list. To set the time zone in accordance with the settings of your operating system or portable device, click the DETERMINE TIMEZONE button.
Page 241 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description Specify the time period (in seconds). The minimum acceptable value Interval value is 3. After specifying the needed parameters, click the APPLY button. When the router is powered off or rebooted, the system time is reset to the default value.
Page 242: Auto Provision
On the System / Auto Provision page, you can enable the Auto Provision function. The Auto Provision function allows your ISP to manage the device’s settings remotely: DIR-X1530 connects to the ISP’s server, compares the current configuration file with the configuration file stored on this server, and updates its settings if the files are different.
Page 243 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Parameter Description File name The location of the configuration file on the ISP's server. A time period (in seconds) between attempts to compare the current File check period configuration file with the configuration file on the ISP's server.
Page 244: Skydns
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual SkyDNS This menu is designed to configure the SkyDNS service. SkyDNS is a web content filtering service which provides protection against malicious web sites for devices connected to the router's network, and also allows to configure filtering, block access to adult web sites, and use search engines safely.
Page 245: Settings
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Settings On the SkyDNS / Settings page, you can enable the SkyDNS service and specify settings for its operation. Figure 178. The SkyDNS / Settings page. To enable the SkyDNS service, click the ENABLE button. Then in the Mail and Password fields, enter the account data (the e-mail address and the password correspondingly) specified upon registration on the SkyDNS service web site.
Page 246 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual By default, the account parameters are automatically synchronized with the SkyDNS service web site once an hour (3600 seconds). To change the automatic synchronization period, specify another value in the Sync period field and click the APPLY button. To start synchronization manually, click the MANUALLY SYNC button.
Page 247: Devices And Rules
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual Devices and Rules On the SkyDNS / Devices and Rules page, you can assign a specific filtering profile to a device connected to the router's network. Figure 179. The SkyDNS / Devices and Rules page.
Page 248 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Configuring via Web-based Interface User Manual In the opened window, specify the following parameters: Parameter Description The MAC address of a device from the router's LAN to which the specified filtering profile will be applied. You can enter the MAC MAC address address of a device connected to the router's LAN at the moment.
Page 249: Operation Guidelines
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Operation Guidelines User Manual CHAPTER 5. OPERATION GUIDELINES Safety Rules and Conditions Please carefully read this section before installation and connection of the device. Make sure that the power adapter and cables are not damaged. The device should be used only as intended in accordance with the documents.
Page 250: Wireless Installation Considerations
RF noise in your home or office. To maximize your wireless range, follow the guidelines below. 1. Keep the number of walls and ceilings between the DIR-X1530 device and other network devices to a minimum – each wall or ceiling can reduce your wireless network range by 3- 90 feet (1-30 meters).
Page 251: Abbreviations And Acronyms
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Abbreviations and Acronyms User Manual CHAPTER 6. ABBREVIATIONS AND ACRONYMS Third Generation Access Category Advanced Encryption Standard Access Point Address Resolution Protocol BPSK Binary Phase-shift Keying BSSID Basic Service Set Identifier Complementary Code Keying...
Page 252 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Abbreviations and Acronyms User Manual ICMP Internet Control Message Protocol Identifier Internet Gateway Device IGMP Internet Group Management Protocol Internet Key Exchange IMEI International Mobile Equipment Identity IMSI International Mobile Subscriber Identity Internet Protocol...
Page 253 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Abbreviations and Acronyms User Manual Push Button Configuration Perfect Forward Secrecy Personal Identification Number Power over Ethernet Point-to-Point Protocol pppd Point-to-Point Protocol Daemon PPPoE Point-to-point protocol over Ethernet PPTP Point-to-point tunneling protocol Pre-shared key...
Page 254 DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router Abbreviations and Acronyms User Manual TKIP Temporal Key Integrity Protocol Universal Access Method User Datagram Protocol UPnP Universal Plug and Play Uniform Resource Locator Universal Serial Bus VLAN Virtual Local Area Network Virtual Private Network...

D-Link DIR-X1530 User Manual

Chapter 1. Introduction

Chapter 2. Overview

Chapter 3. Installation and Connection

Chapter 4. Configuring Via Web-Based Interface

Quick Links

Related Manuals for D-Link DIR-X1530

Summary of Contents for D-Link DIR-X1530

Table of Contents