D-Link DIR-X1530 User Manual page 112

DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router
User Manual
In the Static IP Addresses section, you can specify MAC address and IPv4 address pairs (set a
fixed IPv4 address in the local area network for a device with a certain MAC address). The router
assigns IPv4 addresses in accordance with the specified pairs only when the DHCP server is
enabled (in the Dynamic IP Addresses section, the DHCP value is selected from the Mode of
IPv4 address assignment drop-down list).
Figure 94. Configuring the local interface. The IPv4 tab. The section for creating MAC-IPv4 pairs.
To create a MAC-IPv4 pair, click the ADD button (
address field. You can choose a device connected to the router's LAN at the moment. To do this,
select the relevant MAC address from the drop-down list (the field will be filled in automatically).
Then in the IP address field, enter an IPv4 address which will be assigned to the device with the
specified MAC address. In the Hostname field, specify a network name of the device for easier
identification. To limit the time of the specified IPv4 address assignment, specify the required value
in the Lease time field. Click the SAVE button.
To edit the settings for an existing MAC-IPv4 pair, left-click the relevant line in the table. In the
opened window, change the needed parameters and click the SAVE button.
To remove a MAC-IPv4 pair, select the checkbox located to the left of the relevant line in the table
and click the DELETE button (
If needed, you can add your own address resource records. To do this, click the ADD button (
in the Hosts section (available if in the Dynamic IP Addresses section the DHCP value is
selected from the Mode of IPv4 address assignment drop-down list).
Figure 95. Configuring the local interface. The IPv4 tab. The window for adding a DNS record.
). Then click the APPLY button.
Page 112 of 254
Configuring via Web-based Interface
). In the opened window, fill in the MAC
)