D-Link DIR-X1530 User Manual page 181

DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router
User Manual
Figure 137. The window for changing the settings of the router's port.
In the opened window, specify the needed parameters:
Parameter
Speed
Auto
Select the value to enable autonegotiation.
selected, the Autonegotiation Modes and Flow control sections
are displayed.
Select the 10M-Half, 10M-Full, 100M-Half, or 100M-Full value
to manually configure speed and duplex mode for the selected port.
10M-Half: Data transfer in just
•
can be either sent or
of up to 10Mbps.
10M-Full: Data transfer in two directions simultaneously
•
(data can be sent and received at the same time)
maximum possible
100M-Half: Data transfer in just
•
can be either sent or
of up to 100Mbps.
100M-Full:
Data transfer in two directions simultaneously
•
(data can be sent and received at the same time)
maximum possible
Page 181 of 254
Configuring via Web-based Interface
Description
one direction at a time
received) at the maximum possible
rate of up to 10Mbps.
one direction at a time
received) at the maximum possible
rate of up to 100Mbps.
When this value is
(data
rate
at the
(data
rate
at the