D-Link DIR-X1530 User Manual page 166

DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router
User Manual
Parameter
Enable TX
Beamforming
OFDMA 6
TWT
B/G protection
6 Correct operation of the thechnology will be implemented in the next firmaware version.
Available on the 5 GHz tab.
TX Beamforming is the signal processing/directing technique which
helps to support a high enough transfer rate in the areas with difficult
conditions for the signal propagation.
Move the switch to the right to improve the signal quality.
Available on the 5 GHz tab.
OFDMA (Orthogonal frequency-division multiple access) is a
Wi-Fi 6 standard technology, that improves performance of wireless
networks with a large number of clients by establishing subcarriers
with independent modulations.
Move the switch to the right to improve the network performance.
Available on the 5 GHz tab.
TWT (Target Wake Time) is a Wi-Fi 6 standard technology, that
allows to negotiate wireless devices' wake-up time for data exchange
with the router and to conserve their battery life.
Move the switch to the right to save the battery power for the
connected wireless devices.
Available on the 2.4 GHz tab.
The 802.11b and 802.11g protection function is used to minimize
collisions between devices of your wireless network.
Select a value from the drop-down list.
Auto: The protection function is enabled and disabled
•
automatically depending on the state of the network (this
value is recommended if your wireless local area network
consists of both 802.11b and 802.11g devices).
Always On: The protection function is always enabled (this
•
setting can substantially lower the efficiency of your wireless
network).
Always Off: The protection function is always disabled.
•
Page 166 of 254
Configuring via Web-based Interface
Description