D-Link DIR-X1530 User Manual page 101

DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router
User Manual
Figure 86. The page for creating a new IPIP6 connection. The IP section.
Parameter
Obtain remote host
address automatically
Type
Remote host
Mode
Set MTU automatically
MTU
When all needed settings are configured, click the APPLY button.
After clicking the button, the window for additional configuration of the connection opens.
IP
Move the switch to the right to configure automatic assignment of a
remote host IPv6 address.
Select an identification method for the remote host from the drop-
down list:
Address: The remote host is identified by its IPv6 address.
•
FQDN: The remote host is identified by its domain name.
•
The drop-down list is displayed if the Obtain remote host
address automatically switch is moved to the left.
Enter the remote host IPv6 address if the Address value is selected
from the Type drop-down list.
Enter the remote host domain name if the FQDN value is selected
from the Type drop-down list.
The field is available for editing, if the Obtain remote host
address automatically switch is moved to the left.
An operation mode of the connection.
From the drop-down list, select the DSLite value.
Move the switch to the right to set the maximum size of units
transmitted by the interface automatically.
Move the switch to the left to specify this parameter manually.
Upon that the MTU field is displayed.
The maximum size of units transmitted by the interface.
Page 101 of 254
Configuring via Web-based Interface
Description