PRESONUS Quantum2626 Owner's Manual page 49

6
Studio One Artist Quick Start
6.4 Monitor Mixing in Studio One
6.4.2 Punching In
The Quantum 2626's unique integration with Studio One and ultra-low
latency performance make punching in easier than ever. This section will
guide you through setting up a punch in so that there is no change sonically
between audio you're playing back and the audio you're recording.
Quantum 2626 与 Studio One 的独特集成和超低延迟性能，使
Punching In 比以往更容易。本节将指导你如何设置它，可以
使你正在播放的音频和录制的音频之间，从声音上没有变化。
1. Before you begin, go to Studio One>Preferences and click on the Advanced tab.
开始之前，请你进入 Studio One > Preferences 并点击 Advanced 标签。
2. On the Console preference tab, check the box next to"Audio track
monitoring mutes playback (TapeStyle).This will allow youuse Cue
Mix to monitor during a punch in. Click Apply and then OK.
在 "Console" 控制台优先选项卡上，勾选 "Audio track
monitoring mutes playback (TapeStyle) 音轨监听静音播放
（TapeStyle）"旁边的方框。你将可以在 "Punch In" 期
间使用Cue Mix来监听。点击 "Apply " 应用，然后 "OK" 确定。
3. After you have recorded your audio, set the punch
in and out points in the timeline.
在你录制完音频后，在时间轴上设置 "Punch
In & out" 开始/停止录音点。
4. Enable the Auto punch button the left of the
Metronome settings in thetransport.
启用传输中"Metronome"设置左侧的 "
Auto punch" 按钮。
Quantum 2626
Owner'sManual
47