Change To Energy Saving Temperature; Frost Protection - Toshiba BMS-CT2560U-E Owner's Manual

Touch Screen Controller

Change to energy saving temperature

An energy saving function that changes (shifts) the set temperature according to the current operation mode as follows.
Operation Mode
Cool/Dry
Heat
Auto/Fan
● NOTE
Depending on the connected model, it may not be displayed.

Frost protection

58 -EN
Set Temperature Shift Width
Current set temperature +2°C shift
Current set temperature -2°C shift
Remain at current set temperature
This function monitors and controls frost protection.
Frost protection can only be set when heating is on.
FP is displayed in the place that the set temperature is displayed while frost
protection is operating.
Frost protection is disabled by the following operations, unless disabled from the
frost protection settings.
• Indoor unit is turned off.
• Operation mode is changed to something other than heating.
• Set temperature is changed.
● NOTE
May not be displayed, depending on the model connected.
Owner's Manual