Screen Description - Toshiba BMS-CT2560U-E Owner's Manual

Touch Screen Controller

Screen description

■ General layout screen
No. Name (Icon)
1
Layer Group Name
2
Level display area
3
Floor layout area
4
BACK button
5
Unit icon
6
Selected unit
7
Group display button
8
Group display
* Only the Air to Water Heat Pump (ATW) hot water supplies, the number of FS units and LDs are not included.
■ Detailed layout screen
■ Switch panel display
By swiping to the right or left in the Layer Group Name, you can change the selected
layer.
You can select the floor to display in the floor layout.
Displays the number of air conditioners installed on each layer. *
Tap to display the floor layout on the entire screen.
Returns you to the general layout screen.
Enables you to confirm the position of a unit on the floor layout.
Icon
Indicates indoor unit and ON/OFF unit.
Tap this icon to display the switch icon.
Indicates the Air to Water Heat Pump (ATW) of the hot water supply
function.
Tap this icon to display the switch icon.
Indicates the leak detector (LD).
Tap this icon to display the status of the leak detector (LD).
Indicates the FS unit.
Tap this icon to display the status of the FS unit.
and can be displayed as connected by wires to
If you want to display the wires, refer to the manual for the Section Configuration
Software.
Displays the operating status of the tapped unit.
Tap to display the operating status of the group.
Displays the operating status of units group by group.
Owner's Manual
■ Group panel display
Functions
Description
.
-EN
21