Table of Contents
Advertisement
LT2000 QuickSet Programmer
Typical Clone Programmer on-screen menus.
THE CLONE HAS CONTROL OF THE TV
THE CLONE IS VERSION
THE TV IS VERSION
THE SW IS REVISION
CLONE CLOCK=
TV CLOCK=
-PRESS ANY KEY TO CONTINUE.
-DISCONNECT CLONE WHEN DONE.
C. Learn Setup from Master TV
Press 1 to select the "Learn From TV"
option, then press ON/OFF, POWER, or
ENTER to go to the Memory Bank
Selection Menu. Pick the Memory "Bank"
(1, 2, 3, or 4) you want to store this Master
TV's Setup in by pressing either Channel
key repeatedly to pick Memory 1, 2, 3, or 4.
(If you choose a Memory "Bank" that
already has a master TV's setup in it, it will
be overwritten by this Master TV's setup.)
Once the Clone memory bank is selected,
press ON/OFF, POWER, or ENTER. The
Clone memory bank you have selected will
be shown. Press ON/OFF or POWER to
begin copying the master TV's setup.
Ca. Set the Clock (Optional)
Set the time on the Master TV's Clock. (If
the time has already been copied from
another TV into the Clone programmer, you
can set the Master TV's clock by copying
the time from the Clone programmer.)
The Clone Programmer can copy the
current time to both a master TV and to the
Clone's internal clock; accurate to within
one minute. (Another reason that the Clone
programmer should be equipped with fresh,
high-quality alkaline batteries is for it to
keep the time as accurately as possible.)
XX
XX
XX
XX:XX
XX:XX
CLONE SELECTION MENU
(1) LEARN FROM TV
(2) TEACH TO TV
(3) SET CLONE CLOCK FROM TV
(4) SET TV CLOCK FROM CLONE
(5) DISPLAY TV SETUP
(6) DISPLAY CLONE SETUP
-TO CHANGE MENU ITEMS, PRESS
CHANNEL KEYS OR DIGITS.
Since the Clone Programmer's time cannot
be set directly, the time needs to be copied
from an LG TV equipped with M.P.I. Input
capability.
Once the time is copied to the Clone
programmer, the current time can then be
transferred to another TV. (This can be a
Master TV, or another TV which has had the
features already set up.)
D. Teach Master TV's Setup to Other TV
Once Learning is complete, remove the
M.P.I. cable from the master TV and connect
it to the TV that you want to copy the master
TV's setup to. With the "TV is Controlled by
Clone" message displayed, press 2 or use
either Channel key to go to the "Teach to TV"
option, press ON/OFF, POWER, or ENTER.
Follow on-screen instructions to transfer the
Setup and other information to the
"Learning" TV. After the "Teach to TV is
Complete" message is displayed, press any
key to return to the Clone menus option,
then press ON/OFF, POWER, or ENTER. If
finished, remove M.P.I. Cable from the TV.
E. Disconnect TV Power for 5 Seconds
Remove the TV power cord of the newly
"Cloned TV" from the power outlet for about
5 seconds to activate the newly copied
Setup.
Page 49
Advertisement
Table of Contents
