Table of Contents
Advertisement
Installer Menu
Installer Menu Item 76-I through 95-I
Menu
Function
Item
76-I.
DEFEAT XDS
77-I. NOT USED
78-I.
UPN MSB
79-I.
UPN MSB-1
80-I.
UPN MSB-2
81-I.
UPN LSB
82-I. CHKSM ERROR
83-I.
HANDSHK TIME
84-I. PERMANENT BLK
85-I.
A. MUTE TIME
86-I. V. MUTE TIME
87-I. NOT USED
88-I. EN NOISE MUTE
89-I. POKE ENABLE
90-I. KEY LOCK
91-I. NOT USED
92-I. NOT USED
93-I. NOT USED
94-I. NOT USED
95-I. AUDIO MD DISP
Detailed Descriptions of Installer Menu
Items
0-I. INSTALLER SEQUENCE
Gives access to Installer Menu depending
on the code selected.
0 = 9876
2 = 1478
1-I. POWER MANAGE (Power Management)
Determines hours of no activity before
automatic shutoff. The POWER MANAGE
function is for saving energy. When set to 0,
Power Manage is OFF. Settings range from
0 - 7, with 1 - 7 representing the hours that
the TV will remain on, unless there has
been activity from either the control panel or
remote control.
*M.P.I. Multiple Protocol Input: LG protocol for remote control of TV through RJ11 (M.P.I.)
jack on TV connections panel.
Value
Range
Default Value
0 / 1
0
0 - 255
255
0 - 255
255
0 - 255
255
0 - 255
255
0 / 1
0
0 - 5
0
0 / 1
0
0 - 254
35
0 - 254
40
0 / 1
1
0 / 1
0
0 / 1
0
0 / 1
1
1 = 4321
3 = 3698
Brief Description of Function and Comments
When set to 1, XDS display program information will not appear.
User programmable number, most significant byte. (Line - Day)
User programmable number, most significant byte - 1. (Week)
User programmable number, most significant byte - 2. (SN-HIGH)
User programmable number, least significant byte. (SN-LOW)
Enforces rigid M.P.I.* checksum
Relaxes M.P.I. timing to be compatible with PC based Windows
controlled systems.
Remove block hours setting for Parental Control and make blocks
Controls muting audio delay time when switching between AUX
Controls muting video delay time when switching between AUX
When set to 1, the audio signal volume is limited to a minimum value
while receiving no signal from the broadcaster.
When set to 1, writing to Non - volatile memory thru M.P.I. Is enabled.
When set to 1, frontal keyboard functionality is disebled.
When set to 1, Audio Mode Information is enabled to appear in the
Channel Time Display.
2-I. AC ON (AC Power Switchable)
Allows the TV to turn ON just by applying
AC power. Pressing the ON button is not
necessary. This is desirable when the TV is
plugged into a cable box or a power outlet
controlled by a wall switch. Use ADJ to
select 0 or 1, where 0 is the default is OFF,
and 1 is ON.
NOTE: When set to 1 (ON), the TV does
not respond to ON/OFF commands from
either the remote or the control panel, and
the SLEEP TIMER is also nonfunctional.
3-I. BAND/AFC (Band/Automatic Frequency
Control)
There are 8 possible settings for this option:
0 = Broadcast Fixed
5 = CATV Fixed
6 = HRC Fixed
7 = ICC Fixed
permanent.
sources.
sources.
4 = Broadcast AFC
1 = CATV AFC
2 = HRC AFC
3 = ICC AFC
Page 41
Advertisement
Table of Contents
