Table of Contents
Advertisement
Installer Menu
Use the Installer Menu to set up or change operational settings.
See descriptions of the Installer items on the following pages.
Accessing the Installer's Menu
Installer's menu items can be accessed by using the optional
LP702 installer's remote control. Just press and hold MENU
(about 8 seconds) until the display changes, then press 9, 8,
7, 6, then ENTER. To exit the Installer's Menu, press ENTER
again. Any changes you make will be stored in nonvolatile
memory.
The Installer's menu opens with item 0-I, INST. SEQ. Use the
SELECT key to sequence through the available menu items.
To change a setting use the Left/Right ADJ keys.
Using the Installer's Menu
Items 0-I - 95-I are accessible only in the Installer's Menu.
Their numbers, descriptions, ranges, factory default settings,
and a place for listing any changes made onsite are given
below and on the following pages. The Factory Menu that is
intended for qualified service technicians only, is not shown
(XX-F items). Normally Factory menu items do not require
adjustment.
Menu
Function
Item
0-I.
INSTALLER SEQ
1-I.
POWER MANAGE
2-I.
AC ON
3-I.
BAND/AFC
4-I.
STRT CHANNEL
5-I.
CHAN LOCK
6-I.
GHOST CH
7-I.
START VOLUME
8-I.
MIN VOLUME
9-I.
MAX VOLUME
10-I.
MUTE DISABLE
11-I.
KEY DEFEAT
12-I.
NOT USED
13-I.
SCAN MODE
14-I.
NOT USED
15-I.
SLEEP TIMER
16-I.
EN TIMER
17-I.
ALARM
18-I.
NOT USED
19-I.
NOT USED
20-I.
FEATURE LEVEL
21-I.
V-CHIP
22-I.
MAX BLK HRS
23-I.
CAPTION LOCK
24-I.
TEXT MODE
25-I.
FUNCTION PRE.
Value
Range
Default Value
0 - 3
0
0 - 7
0
0 / 1
0
0 - 7
0
0 - 255
255
0 / 1
0
0 / 1
0
0 - 63, 255
255
0 - 63
0
0 - 63
63
0 / 1
0
0/1
1
0 / 1
0
0 / 1
1
0 / 1
1
0 / 1
1
0 / 1
1 Zen 1
0 / 1
1
0 - 99
12
0 / 1
0
0 / 1
1
0 - 3
0
Brief Description of Function and Comments
Leave default set 0.
Sets number of hours of no activity before auto shutoff.
Set to 1 to enable auto turn on at power up.
Tuning band.
Channel at turn-on (255 last Ch).
When set to 1, cannot tune from current channel.
Set to 1 to enable Ghost Channel display.
Volume level at TV turn-on (Set 255 to retain last volume level).
Minimum volume setting.
Maximum volume setting.
Set to 1 to disable mute function.
Set to 1 to disable the front panel keyboard menu key
Puts On-Off in Ch Up/Down sequence.
Set to 1 to enable Sleep Timer.
Set to 1 to enable Timer.
Set to 1 to enable Alarm.
Leave default set 1 (1 Zen 1)
Set to 1 to enable V-Chip.
Select number of Parental Control blocking hours.
Set to 1 to retain caption setting at turn off.
Set to 1 to add Text option to closed caption menu.
Controls channel preview in Pay-Per-View function menu.
INSTALLERS
INSTALLER 1
INSTALLER 2
INSTALLER 3
INSTALLER 4
INSTALLER 5
INSTALLER 6
INSTALLER 7
V 1.17
Typical Installer Menu
XX-F Menu Items (Not
shown here) are service
type adjustments and only
qualified technicians having
specialized test equipment
should access them.
Page 39
Advertisement
Table of Contents
