LG RU-27FB30C Installation And Operating Manual page 48

Lg ru-27fb30c: user guide
Hide thumbs Also See for RU-27FB30C:
Table of Contents

Advertisement

LT2000 QuickSet Programmer
Before you begin:
• The "master TV" should be connected to a
good, stable signal from an over-the-air
antenna or cable service and turned on.
• Teaching and Learning is only possible
between identical model LG TVs. (However,
the Clone programmer can store 4 different
master TV setups.)
WARNING: Copying a blank or
incorrect memory into a TV will cause
the TV to operate erratically or
become inoperable.
• Use a LG MBR Remote like the MBR3447LG
or the TV front panel controls to operate
Learning and Teaching menus.
• Make sure that the batteries in the Clone
programmer are fresh.
• If the batteries are removed, the Clone Clock
time will be lost.
• Decide if you want to set the time from the
Clone programmer or copy the time to the
Clone programmer; from a TV which has the
clock set to the current time.
• Follow the connection diagrams on the
previous page to connect the Clone to a
master TV and, after learning is complete, to
another TV to "teach" it the setup.
A slow flashing green light indicates there is a problem with the communications
between the TV and the programmer. In this case, check for a damaged cable, poor
contacts, or other connection troubles.
If the status indicator is red, the programmer batteries are low and should be replaced.
Use 4 good-quality alkaline AA batteries.
Page 48
• Setting the time and transferring it to
the Clone or another TV is a separate
procedure.
• Once a TV's setup is copied to another
TV, that TV needs to be disconnected
from power for about 5 seconds to
activate the newly copied setup.
• See Troubleshooting to solve problems.
A. Set Up a Master TV
Using an LG Multi-Brand remote like the
MBR3447LG, set up a "Master" TV with
custom settings and features as
described in the TV's operating guide.
The master TV's Setup is what you will
copy to the Clone Programmer and
transfer to TVs of the same model so
they will operate identically.
B. Connect Clone to Master TV
If there is a good connection, the "Clone
has Control of TV" message will appear.
(See menu on the next page.)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ru-27fb31c

Table of Contents